Niko Home Control II programming examples
Niko Home Control II programming examples
In this manual, you, as an installer, can find some Niko Home Control programming examples to help you to create your customer's solutions. The first page in the overview below 'overview by label' shows you all examples sorted by application area. Once you have selected a page, you can return to the overview via the page tree on the left.
-
Overview by label
-
Simulation of a code keyboard with a push button (with LEDs)
-
Indoor and outdoor motion detector activate the same lamp
-
Creating a short pulse when activating and deactivating the lighting
-
Controlling a shutter using a fixed time schedule
-
Turning off the volume of Sonos/Bose speakers when someone is at the door
-
Controlling the lighting in a sports hall on two sides of a curtain
-
Use Sonos/Bose speakers in scenes and turn them off when someone is at the door
-
Using one push button for creating more than 2 different scenes
-
Using a push button with LED for activating the lighting for 4 hours, the LED remains activated during this period
-
Controlling outdoor lighting using time schedules
-
Controlling the lighting and the ventilation in a toilet room
-
Automatic control of sunblinds with a light sensor and a wind sensor 0-10V
-
Controlling a device with a push button and a digital potential-free sensor module
-
Dimming a lamp using a fixed time schedule and an indoor motion detector
-
Creating a pulse of less than 1 second using a push button
-
Use excess electricity to run the airconditioning
-
Making a heat pump respond to excess electricity
-
Use excess electricity to run non-connected household appliances
-
In case of alarm, turn on lights and open shutters
-
Set your house in an ‘away’ state when arming the alarm system