Comelit: Use Niko Home Control on your indoor unit
What do you need?
Niko requirements
Your Niko Home Control installation meets the following requirements:
It has a wireless smart hub or a connected controller II.
It is configured with the most recent programming software.
It has an active internet connection.
It is registered and you have your e-mail address and password on hand.
Automatic software upgrades are enabled.
Comelit requirements
Your system meets the following requirements:
The access control system is installed as a combined solution for an entire apartment building consisting of at least four flats.
The indoor unit is connected to a Wi-Fi router (2,4 GHz) that creates a local home network inside your flat.
The indoor unit is connected to the same local home network as the Niko Home Control installation.
The indoor unit has an active internet connection to allow software upgrades.
The Niko Home app needs to be enabled on the indoor unit, via the Comelit VIP manager application. Make sure that the indoor unit has an active internet connection, when you change this setting.
Your system is one of the following Comelit products*:
Indoor monitor |
|
|---|
*Consult the website of the supplier for detailed specifications and the latest products.
The Niko Home app is included in the Comelit device. Niko is continuously working on improvements to the Niko Home app. However, the installation of the Niko Home app on the Comelit device is entirely dependent on the software and associated upgrades on this monitor.
Consequently, future Niko Home app upgrades on your device may be limited by the availability and timing of the software ugrades of the Comelit device itself.
For questions regarding the functions and upgrades of the Comelit device, please refer to Comelit.
For questions about the Niko Home app and related functions, please contact Niko customer services.
Programming of the Comelit connection
The Niko Home app needs to be enabled on the indoor unit, via the Comelit VIP manager application.
To activate the connection, you need to log in to the Niko Home app on the Comelit indoor unit. To deactivate the connection, you just log out.