Bubendorf

What can you do with Bubendorf and Niko Home Control?

Control your shutters and blinds

If you connect your motor-controlled shutters and blinds to Niko Home Control, you can control them via push buttons, the Niko Home app on a tablet or smartphone, the Touchscreen and/or Digital black.

You can perform the following actions:

• Open/Close

• Stop opening/closing at an intermediate position

• Go to a predefined position

We recommend the following options to make even better use of this connection:

Automatically open and close the shutters and blinds based on a weekly time schedule or sunrise/sunset events; see Creating a weekly schedule.

What do you need?

Niko requirements

Your Niko Home Control installation meets the following requirements:

• It has a wireless smart hub or a connected controller II.

• It is configured with the most recent programming software (version 2.20 or higher).

Depending on the basic modules of your Niko Home Control installation, you need to install the following additional products:

Bubendorf requirements

RF-controlled, battery-powered and solar-powered motors are typically not compatible with Niko Home Control.

Venetian blinds are usually compatible with Niko Home Control. However, controlling the slat position is only possible for installations on bus wiring (containing a connected controller) and you will need additional products and a complex configuration that is adapted to your venetian blinds.

Your system meets the following requirements:

• It has an integrated limit switch for open/closed positions

• It has a 3-wire 230V AC connection, or a 2-wire 12V DC or 24V DC connection.

• It is compatible with the chosen motor module or connected motor control (see Niko requirements). Check the specifications such as maximum current per output and switching delay on niko.eu.

Your system is one of the following Bubendorf products*:

*Consult the website of the supplier for detailed specifications and the latest products.

Wiring diagrams

Connecting 230 V AC motors

Via the motor module on bus	Via the connected motor control

Programming of the Bubendorf connection

Configure the motor module or connected motor control via the Niko Home Control programming software. For more information, see Creating a control or a device.

You can use the following programming example as inspiration or as a starting point: Controlling a shutter using a fixed time schedule