Mitsubishi Electric

What can you do with Niko Home Control?

By using Niko Home Control with your Mitsubishi Electric system, you can do the following:

	Installation with multi-zone
	air conditioning	heat pump	ventilation
Check and control the room temperature	✔️	✔️
Check and control the mode (auto, heat, cool, etc.)	✔️	✔️
Check and control the ventilation speed (e.g. daily, boost, guests, holiday)			✔️
Check and control the ventilation mode (auto, program, manual)			✔️

The Mitsubishi Electric functions automatically appear in your Niko Home app and on your touchscreen after you activate the link between both systems. To control the Mitsubishi Electric functions on your Digital black, select the Mitsubishi Electric controls for your Digital black in the Niko Home app or configure the Digital black in the Niko Home Control programming software.
The functions can also be combined in routines to control multiple items simultaneously at the simple press of a button.

The available functionality within Niko Home Control depends upon the specific installation features of the Mitsubishi Electric system.
You can always use the MELCloud app for more advanced settings and configurations.

What do you need?

In short

Extra information

General

No additional electrical wiring is required.
You have a computer with a web browser and an internet connection to set up the link between both systems.

Your Niko Home Control installation meets the following requirements:

It has a wireless smart hub or a connected controller.
It is configured with the most recent programming software.
It has an active internet connection.
It is registered.
You have your Niko Home Control installation e-mail address and password on hand.
If you want to use the Mitsubishi Electric functions in combination with Niko Home Control routines, these routines need to be programmed with the Niko Home Control programming software after the link has been activated.

If you have not registered your Niko Home Control installation, go to mynikohomecontrol.niko.eu.

Your Mitsubishi Electric system meets the following requirements:

It is compatible with the MELCloud platform.
It is equipped with a WiFi-adapter.
It has an active internet connection.
It is registered.
You have your MelCloud user account and password on hand.
For air conditioning: no extra requirements
For a heat pump: It is an air-to-air or an air-to-water heat pump.
For ventilation: It is a Mitsubishi Electric Lossnay ventilation system.

If you have not registered your Mitsubishi Electric system, go to melcloud.com

How do you activate the link between your Niko Home Control and your Mitsubishi Electric system?

If you only want to control your partner system with the Niko Home app, a touchscreen or a Digital Black activating the connected service in the Niko Home Control programming software suffices.

Check if you have everything you need (see above).
Activate the Mitsubishi Electric connected service in the Dashboard menu. Doing this, you already can control your Mitsubishi Electric system via the Niko Home app and a touchscreen. To control the Mitsubishi Electric functions on your Digital black, select the Mitsubishi Electric controls for your Digital black in the Niko Home app or configure the Digital black in the Niko Home Control programming software.
If you want to use your Mitsubishi Electric system as a part of your configuration (use the system in routines and/or conditions), follow the additional steps below.
Add one or more of the following devices:
- generic heating Mitsubishi Electric
- generic warm water Mitsubishi Electric
- generic ventilation Mitsubishi Electric
Create the desired routines and/or conditions with the Mitsubishi Electric device(s).
Address the Mitsubishi Electric devices.
Upload the configuration file to your installation.

How do you deactivate the link between your Niko Home Control and your Mitsubishi Electric system?

Deactivate the Mitsubishi Electric connected service in the Dashboard menu.
If you used your Mitsubishi Electric system as a part of your configuration (used the system in routines and/or conditions), follow the additional steps below.
Remove the Mitsubishi Electric device(s) from the floor plan.
Upload the configuration file to your installation.

After deactivating the link, the following happens:

The Mitsubishi Electric functions disappear from your Niko Home app, your touchscreen and your Digital black.
When used in Niko Home Control routines, the Mitsubishi Electric functions will not be executed anymore.