With this connected switching socket outlet with built-in consumption measurement, you choose extra comfort, peace of mind and energy awareness. The socket outlet can be perfectly installed in all new construction projects and can also easily replace an existing socket outlet in renovation projects (provided that appropriate wall mounting boxes are present) without adapting the wiring or circuit breakers.
You connect the socket outlet without additional wiring with a wireless switch and the wireless smart hub (552-00001) for Niko Home Control. That way you have full control over your socket outlets and you can easily create useful new functionalities, including all-off or all-on and panic functions, routines, calendar and scheduling functions, remote control via the app, insight in your energy consumption, consumption warnings on your smartphone, starting automatic actions when a consumption energy level is exceeded ...
Overview
170-33505
170-33605
170-34505
170-34605
Required parts
A complete connected switching socket outlet consists of the following parts:
The connected socket outlet can be switched on/off in Niko Home Control actions and routines (only in Connected use)
The connected socket outlet can measure the energy consumption of a plugged-in device and shows it in the 'Energy' tab in the Niko Home app (only in Connected use).
The connected socket outlet can start Niko Home Control actions and routines when reaching a certain energy consumption level and it can generate notifications in the Niko Home app and/or touchscreen. Up to 3 energy consumption threshold levels are supported (only in Connected use).
Control
Technical data
Dimensions in mm
170-33505
170-33605
170-34505
170-34605
Specification
Value
Article numbers
base:
pin earthing: 170-33505 (claw fixing) or
pin earthing: 170-33605 (screw fixing) or
side earthing: 170-34505 (claw fixing) or
side earthing: 170-34605 (screw fixing)
central plate:
xxx-66630 for pin earthing
xxx-66930 for side earthing
Power supply
230 Vac (± 10%), 50 Hz
Communication protocol
Zigbee® 3.0, 2.4 GHz
Mounting method
Flush mounting in a wall-mounting box (min. depth: 50 mm)
Weight
98 g
Ambient temperature
0 - 40 °C
Dimensions (HxWxD)
73 x 71 x 37.6 mm for pin earthing
73 x 73 x 42.4 mm for side earthing
Protection degree
IP20D
Modification of settings
Configuration and control app Niko Home OR Niko Home Control programming software
Maximum range
10 m (Mesh networking support for longer range)
Stand-by consumption
0.15 W
Maximum load (*)
16 A / 3680 W
Circuit breaker (**)
Wiring 2.5 mm² Maximum MCB rating C20
Wiring 1.5 mm² Maximum MCB rating C16
Measuring range (***)
1 - 3680 W
Measuring accuracy (****)
± 0.5 W (1 - 5 W)
± 5 % (5 - 3680 W)
System compatibility
Zigbee® 3.0
Niko Home Control II
Maximum per installation
25 connected socket outlets
Maximum frequency power
10 dBm
Wire capacity
2 x 2.5 mm²
Wire stripping length
10 - 12 mm
Marking
CE (all variants)
CEBEC, NF (170-33505 and 170-33605)
KEMA (170-34605)
(*) Not suitable for heavy loads that have long and cycling operations above 2300W such as electric vehicle charging (in mode 1 or 2), electrical heating devices or heavy inductive loads (e.g. motors). When controlling these loads the temperature protection mechanism can be activated.
(**) To be installed in accordance with the applicable regulations.
(***) Valid for a normal voltage (230 Vac).
(****) This device should not be used for billing purposes. The data recorded by this device should be used for information purposes only.
Specifications
JavaScript errors detected
Please note, these errors can depend on your browser setup.
If this problem persists, please contact our support.
