Use the smart plug to switch any plugged-in device on and off and to measure its energy consumption. Once the smart plug has been inserted into a wall-mounted socket outlet, you can switch the plugged-in device on and off locally using the button on the plug. To benefit from all the smart functionalities Niko Home Control has to offer such as smartphone control inside and outside the home (e.g. in an all-off function or solar mode) and to monitor your energy consumption, you can wirelessly connect the smart plug to the separately available wireless smart hub for Niko Home Control (552-00001). The easy way of connecting the smart plug makes it possible to move the plug around in your house to discover the energy consumption of multiple appliances with just one smart plug.
The smart plug can be switched on/off in Niko Home Control actions and routines (only in Connected use)
The smart plug can measure the energy consumption of a plugged-in device and shows it in the 'Energy' tab in the Niko Home app (only in Connected use).
The smartplug can generate notifications in the Niko Home app based on the energy consumption of the plugged-in device.
Control
Technical data
Dimensions in mm
552-80699
552-80698
Specifications
Specification
Value
Article numbers
pin earthing: 552-80699
side earthing: 552-80698
Power supply
230 Vac (± 10%), 50 Hz
Communication protocol
Zigbee® 3.0, 2.4 GHz
Weight
118 g (552-80699)
125 g (552-80698)
Ambient temperature
0 - 35 °C
Dimensions (HxWxD)
60 x 60 x 80 mm
Stand-by consumption
≤ 0.5 W
Switching capacity (*)
16 A / 3680 W
Maximum number of switching cycles
10 000
Internal overcurrent protection
switches off at > 16 A
Maximum range
10 m (Mesh networking support for longer range)
Measuring accuracy (**)
± 0.5 W (1 - 5 W)
± 5 % (5 - 3680 W)
Maximum frequency power
10 dBM (552-80699)
5 dBM (552-80698)
System compatibility
Zigbee® 3.0
Niko Home Control II
Niko Home Control solar mode
Modification of settings
Configuration and control app Niko Home OR Niko Home Control programming software
Maximum per installation
25 smart plugs
Protection degree
IP20D
Marking
CE
(*) Not suitable for electric vehicle charging nor frequent switching of heavy loads (e.g. motors or electrical heating devices without an integrated thermostat). High capacitive and inductive loads may in some cases damage the device or reduce the number of switching cycles.
(**) This device should not be used for billing purposes. The data recorded by this device should be used for information purposes only.
JavaScript errors detected
Please note, these errors can depend on your browser setup.
If this problem persists, please contact our support.
