Generic controls/Push buttons

Parameters

Control name	Parameter	Description
Push button with LED(s) and comfort sensors	Temperature calibration offset	Calibration of the temperature sensor, from -6 °C to 6 °C, in increments of 0,5 °C
Single Niko Rocker or Niko Toggle	Function	Set the function of thebutton: On/off switch: toggle the button to e.g. turn a light on/off. Dimmer: toggle and hold the button to dim a light Motor control: toggle and hold the button to e.g. open/close a shutter Two separate generic buttons: the switch can be linked to two separate basic actions or routines
Single Niko Rocker or Niko Toggle	Temperature calibration offset	Calibration of the temperature sensor, from -6 °C to 6 °C, in increments of 0,5 °C
Double Niko Rocker or Niko Toggle	Function left side Function right side	Set the function for eachbutton, seeSingle Niko Rocker or Niko Toggle - Function.
Double Niko Rocker or Niko Toggle	Temperature calibration offset	Calibration of the temperature sensor, from -6 °C to 6 °C, in increments of 0,5 °C

All other generic controls in de the software have no parameters.
Before using a rocker/toggle switch in basic actions, routines and conditions, you have to set its function.

Linked basic actions and routines

The settings below can be configured according to the control or device, as well as the basic actions and routines you create.

Control name	Setting	Description
Niko Rocker Niko Toggle Push button Push-button interface	Shift	Set the shift function: Enabled Disabled
Push button Push button with LED(s) and comfort sensors Push-button interface	Function	Set the function: Normal button: activate the basic action or routine bypressing the button. The button has a single function. Shift button: give the button 2 functions based on a condition that is fulfilled (see Shift function) Double function button: give the button 2 functions, depending on whether it ispressed for a short or a long time. Set the Duration for long press.
Niko Rocker Niko Toggle	Function	Only available when the parameter Function of the control is set to Two generic separate buttons. Set the function, see Push button - Function.
Push button Push button with LED(s) and comfort sensors Push-button interface	Operating mode	Set the operating mode: Short press: activate the basic action or routine by briefly pressing the button. Press and hold: activate the basic action or routine by holding down the button. Set the Duration. Push-button mode: activate the basic action or routine for as long as you keep the button pressed.
Niko Rocker Niko Toggle	Operating mode	Only available when the parameter Function of the control is set to Two generic separate buttons. Set the operation mode, see Push button - Operating mode.
Niko Rocker Niko Toggle Push-button interface	Duration	When the Function is set to Double function button, set the duration for long press. When the Operating mode is set to Press and hold, set the hold duration.
Niko Rocker Niko Toggle	When active When inactive	Set the LED colour and the LED brightness of the feedback LED when the basic action or routine is active or inactive.
Push button with LED(s) and comfort sensors	Feedback LED	Set the behaviour of the LED: Normal Inverted Always on Always off