Smappee

Coming soon: (de)activate the link between Niko Home Control and your Smappee charging station via the Niko Home Control programming software.

What can you do with Niko Home Control?

By using Niko Home Home Control, you can charge your car as efficiently as possible in one of the following modes:

Solar mode
Normal mode
Stop/pause mode
Smart mode (as of software version 2.21)
Boost mode (as of software version 2.21)

When charging your car with Niko Home Control, the following features are supported:

Load balancing (i.e. the car's charging power is adapted automatically as a fuse overload protection mechanism)
Control your peak consumption via the Niko Home app. See Energy management of car chargers.
Control max. 4 electric vehicle charging sockets/connections in one Niko Home Control installation (as of software version 2.22). You can use a combination of multiple brands supported by Niko Home Control

What do you need?

	In short	Extra information
General	No additional electrical wiring is required. You have connected both systems to the same home network.
	Your Niko Home Control system meets the following requirements: It has a connected controller II. It is configured with the most recent programming software.	The central energy consumption in your home is to be measured. If you dispose of a digital meter with a P1 port, you can use your wireless bridge ( 550-00640 ) to monitor the energy usage in your home. Alternatively, you can use an electricity measuring module (550-00801 or 550-00803) or the wireless measuring module (552-00803) with clamps. If you opt for the wireless measuring module, a wireless bridge is required.
	Your Niko Home Control system meets the following requirements: It has a wireless smart hub. It is configured with the most recent programming software. It is registered and you have your e-mail address and password on hand.	The central energy consumption in your home is to be measured. If you dispose of a digital meter with a P1 port, you can connect this directly to the wireless hub to monitor the energy usage in your home. Alternatively, you can use the wireless measuring module (552-00803) with clamps.
	You have a Smappee AC charging station for residential use, equipped with a Genius II module	Your Smappee EV charger is active and needs to be configured via the Smappee configuration tools to guarantee correct operation. Your Smappee EV charger is connected to the internet. Your Smappee Genius II module is connected to the same network as Niko Home Control. The Smappee energy management functions are disabled.

How do you (de)connect Niko Home Control and your Smappee charging station?

Any basic actions and routines linked to your Smappee EV charging station are updated via the programming software.
For more information on the requirements and detailed instructions, see the software manual.