SMA: connection via measuring module
What do you need?
Niko requirements
Your Niko Home Control installation meets the following requirements:
It has a wireless smart hub or a connected controller II.
It is configured with the most recent programming software (version 2.20 or higher).
Depending on the installation type, you need the following connections and additional products:
In case you have a connected controller, install and connect a measuring module on bus or a wireless measuring module (the wireless bridge is strictly needed to connect a wireless measuring module).
In case you have a wireless smart hub, install and connect a wireless measuring module.
SMA requirements
Your system is one of the following SMA products*:
Single-phase | Three-phase | |
---|---|---|
String inverter |
|
|
Hybrid inverter |
|
|
Battery inverter |
| - |
*Consult the website of the supplier for detailed specifications and the latest products. In general, the SMA inverters sold from 2017 onwards are compatible.
Wiring diagrams
Connecting a measuring module on bus
In case you have a single-phase inverter, you can measure the inverter and two other circuits:
In case you have a three-phase inverter, you will need all clamps of the measuring module to measure the energy flow of the inverter:
Connecting a wireless measuring module
In case you have a single-phase inverter, you can measure the inverter and two other circuits:
In case you have a three-phase inverter, you will need all clamps of the measuring module to measure the energy flow of the inverter:
Programming of the SMA connection
Configure the measuring module via the Niko Home Control programming software. For more information, see Creating an energy reading.