Skip to main content
Skip table of contents

NIBE

For an installation with version 2.16 or earlier, the link between Niko Home Control and NIBE can be activated and deactivated on mynikohomecontrol.niko.eu.

What can you do with Niko Home Control?

The API connection is not available anymore. NIBE upgraded their systems to a new cloud platform (myuplink platform), which is not compatible with the API supported by Niko Home Control. You can still use the wired connections.

By using Niko Home Control with your NIBE system, you can do the following:

  1. In combination with Niko Home Control, your NIBE system can be used to perform multi-zone heating and cooling.
    Connect your NIBE system via API or using the Niko Home Control multi-zone heating or cooling module (550-00150) and push buttons with LED(s) and comfort sensors.
    Multiple functions are available depending on whether your Niko Home Control installation contains a smart hub or a connected controller.

  2. In addition, you can check your ventilation and check your ventilation speed.
    Note that in this case, your NIBE system must be connected via API.

  3. In closing, you can perform energy routines with Niko Home Control: solar mode and peak mode.
    You can enable these functions by connecting your NIBE system via API or SG-ready contacts

Multi-zone heating/cooling

With the smart hub (552-00001)

With the connected controller (550-00003)

Connected

  • Perform single and multi-zone control

  • Check the room and outside temperature

  • Choose the heating program mode (e.g., home, away, vacation)

  • Check and boost the temperature of the hot water system

  • Perform single and multi-zone control

  • Check the room and outside temperature

  • Choose the heating program mode (e.g., home, away, vacation)

  • Check and boost the temperature of the hot water system

Using the Niko Home Control multi-zone heating or cooling module (550-00150) and push button(s) with LEDs and comfort sensors

  • Not available

  • Perform single and multi-zone control

  • Check and set the room temperature

  • Choose the heating program mode (e.g., home, away, vacation)

  • Check and set the weekly program

Ventilation

With the smart hub (552-00001)

With the connected controller (550-00003)

Connected (via API)

  • Check your ventilation speed

  • Boost your ventilation

  • Check your ventilation speed

  • Boost your ventilation

Energy automation

With the smart hub (552-00001)

With the connected controller (550-00003)

Connected (via API)

  • Solar mode

  • Peak mode

  • Solar mode

  • Peak mode

Using SG-ready contacts

  • Solar mode

  • Peak mode

  • Solar mode

  • Peak mode

The NIBE functions automatically appear in your Niko Home Control apps and your touchscreens after your activate the link between both systems. These functions can also be combined in routines/actions to control multiple items simultaneously at the simple press of a button (e.g. turn off all the lights, set your heating system in away mode and boost the ventilation when pressing the leaving the house button).

  • The available functionality within Niko Home Control depends upon the specific installation features of the NIBE system.

  • You can always use the NIBE Uplink app for more advanced settings and configurations.

  • Additional electrical wiring is not needed to connect both systems via the API.

How do you activate the link between your Niko Home Control and your NIBE system?

You can (de)activate the link between Niko Home Control and your NIBE system via the Niko Home Control programming software.
Note that any basic actions and routines linked to your NIBE system are also updated via the programming software.
You will find the requirements and detailed instructions in the software manual.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.