Connected double switch, Zigbee®, 2 x 10 A
Description
This Zigbee® switch allows you to operate lighting circuits.
You can perfectly install this smart switch in new construction projects and use it to replace a conventional switch in renovation projects without cutting, grinding or adding electrical wires. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching.
The connected double switch, Zigbee® operates in 2 modes: stand-alone and connected mode.
In stand-alone mode, it is not connected to a wireless bridge (550-00640) or smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.
In connected mode, it is connected to a wireless bridge (550-00640) or smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:
- Add the connected switch to a scene or all-off function
- Control additional lighting circuits (apart from the one wired to the connected Zigbee® switch)
- Link it to a warning (all-on) function, routines, calendar or scheduling functions
- Enable, disable or invert the feedback LED
- Control the connected switch via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x, 551-1800x) or remotely via a smart device with the Niko Home app
When connected to your Niko Home Control installation, the connected switch, Zigbee® will automatically be upgraded to the latest firmware version.
Overview
There are 4 mechanical variants, which fit most European wall-mounting boxes.
More details can be found under Installation. Select the desired variant based on the fixing method and the desired vertical centre distance if you install a multifold wall-mounting box.
Required Parts
Double connected switch, Zigbee®
A complete connected double switch, Zigbee® consists of the following parts:
- 1 base
Choose one from the table below:
Article number | Description |
|---|---|
Double connected switch, Zigbee®, 60 x 71 mm, claw fixing | |
Double connected switch, Zigbee®, 60 x 71 mm, screw fixing | |
Double connected switch, Zigbee®, 71 x 71 mm, screw fixing | |
Double connected switch, Zigbee®, 71 x 71 mm, claw fixing |
- 1 central plate
Choose one from the table below:
Article number | Description |
|---|---|
This finishing set for an electronic switch or push button is fitted with a transparent lens. The feedback LED underneath lights up when the switch or push button is active. | |
This finishing set for an electronic switch or push button does not contain a transparent lens. As a result, the feedback LED underneath the finishing set is invisible. |
Note that xxx represents the colour.
- 1 faceplate
The connected switch is compatible with all faceplates from the Niko range. For more information, consult our Finishings website page.
Optional Parts
Paint protection cap
Optionally, you can order a paint protection cap (170-00099) to cover the connected double switch, Zigbee® during painting work. With it, you avoid getting paint spatters on your switching materials.
Double push-button extension
If you wish, you can attach one or more double push buttons to the extension terminals of the double connected switch, Zigbee®.
A complete double push-button extension consists of the following parts:
- 1 base
The following optional double push-button bases can be connected to the extension terminal of a double connected switch, Zigbee®:
Article number | Centre-to-centre distance | Wire connection | Fixing method |
|---|---|---|---|
60 x 71 mm | Plug-in terminals | Claw fixing | |
60 x 71 mm | Plug-in terminals | Screw fixing | |
60 x 71 mm | Screw terminals | Claw fixing | |
60 x 71 mm | Screw terminals | Screw fixing | |
71 x 71 mm | Plug-in terminals | Claw fixing | |
71 x 71 mm | Plug-in terminals | Screw fixing | |
71 x 71 mm | Screw terminals | Claw fixing | |
71 x 71 mm | Screw terminals | Screw fixing |
- 1 central plate
Article number | Description |
|---|---|
Central plate for a double push button, without lens | |
Central plate for a double push button, with two lenses. Combine with LED lighting units to see if the light is switched on or not |
Note that xxx represents the colour.
- 1 faceplate
The connected switch, Zigbee® is compatible with all faceplates from the Niko range. For more information, consult our Finishings website page.
Control
Technical data
Dimensions
Article number | ||||
|---|---|---|---|---|
Fixation type | Claw | Screw | Screw | Claw |
Front view, dimensions |
|
|
|
|
Side view, dimensions |
|
|
|
|
Suited for a multifold wall-mounting box with vertical centre distance | 60 mm | 71 mm | ||
Suited for a multifold wall-mounting box with horizontal centre distance | 71 mm | 71 mm | ||
Load Table
Below table gives an overview of the permitted loads at an ambient temperature of 40°C.
Specifications
| Specification | Value | |
|---|---|---|
Article number | 552-721X2 | |
EAN 552-72102 | 5413736368026 | |
EAN 552-72122 | 5413736368446 | |
EAN 552-72112 | 5413736368408 | |
EAN 552-72132 | 5413736385481 | |
Maximum load per channel | 1 x 10 A | |
| Maximum load both channels | Max. 16 A (1 x 10 A + 1 x 6 A) | |
| Power supply | 230 Vac ± 10%, 50 Hz | |
| Stand-by power | 0.46 W | |
| Circuit Breaker | Maximum MCB rating C16* | |
Max. inrush current | 100 A | |
Wire capacity | 1 x 2.5 mm2 | |
Protocol | Zigbee® 3.0, 2.4 GHz | |
| Mounting method | Flush-mounting box | |
| Flush-mounting box specifications (also see the below image) | ||
A. Depth | Min. 40 mm (cabling space included) | |
B. Claw/screw fixing | 60 mm | |
| C. Inner diameter box | 60 mm | |
D. Multifold boxes centre distance horizontal | 71 mm* | |
| E. Multifold boxes centre distance vertical | 71 mm* | |
| F. Multifold boxes centre distance vertical for BE and FR | 60 mm* | |
Mounting height | 110 - 120 cm | |
| Modification of settings | ||
Stand-alone mode | Buttons on front panel, behind the central plate | |
| Connected mode | Niko Home Control programming software Niko Home app | |
Max cable length extension switches | 50 m | |
Maximum range (between switch and smart hub or wireless bridge) | 10 m (Longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices) | |
| Maximum per installation | Max. 50 connected Zigbee® devices | |
| Operating frequency | 2.4 GHz | |
| Maximum RF power | 10 dBm | |
Protection degree | IP20 | |
| Ambient temperature | 0 – 40 °C | |
| Dimensions (HxWxD) | ||
| Weight | 70 g | |
| Marking | CE, Zigbee® | |
| * To be installed in accordance with the national regulations | ||
