Connected motor control, Zigbee®, 3 A
Description
This Zigbee® motor control allows you to switch a 230 V motor of max. 3 A from automatic roll-down shutters, sun blinds, or venetian blinds.
You can perfectly install this connected motor control in new construction projects and use it to replace a conventional motor control in renovation projects without cutting, grinding or adding electrical wires.
The connected motor control, Zigbee® operates in 2 modes: stand-alone and connected mode.
In stand-alone mode, it is not connected to a wireless bridge (550-00640) or smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.
In connected mode, it is connected to a wireless bridge (550-00640) or smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:
Add the connected motor control to a scene or all-off function
Control additional lighting circuits (apart from the one wired to the connected Zigbee® switch)
Link it to a warning (all-on) function, routines, calendar or scheduling functions
Enable, disable or invert the feedback LED
Control the connected motor control via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x, 551-1800x) or remotely via a smart device with the Niko Home app
When connected to your Niko Home Control installation, the connected motor control, Zigbee® will automatically be upgraded to the latest firmware version.
Overview
There are 4 mechanical variants, which fit most European wall-mounting boxes.
More details can be found under Installation. Select the desired variant based on the fixing method and the desired vertical centre distance if you install a multifold wall-mounting box.
Required Parts
Connected motor control, Zigbee®
A complete connected motor control, Zigbee® consists of the following parts:
1 base
Choose one from the table below:
Article number | Description |
|---|---|
Connected motor control, Zigbee®, 60 x 71 mm claw fixing | |
Connected motor control, Zigbee®, 60 x 71 mm, screw fixing | |
Connected motor control, Zigbee®, 71 x 71 mm, screw fixing | |
Connected motor control, Zigbee®, 71 x 71 mm, claw fixing |
1 central plate
Choose one from the table below:
Article number | Description |
|---|---|
This finishing set for a double electronic roll-down shutter switch is fitted with a transparent lens. The feedback LED underneath lights up when the roll-down shutter switch is active. | |
This finishing set for a double electronic roll-down shutter switch does not contain a transparent lens. As a result, the feedback LED underneath the finishing set is invisible. |
Note that xxx represents the colour.
1 faceplate
The connected motor control is compatible with all faceplates from the Niko range. For more information, consult our Finishings website page.
Optional Parts
Paint protection cap
Optionally, you can order a paint protection cap (170-00099) to cover the connected motor control, Zigbee® during painting work. With it, you avoid getting paint spatters on your switching materials.
Control
Technical data
Dimensions
Article number | ||||
|---|---|---|---|---|
Fixation type | Claw | Screw | Screw | Claw |
Front view, dimensions |
|
|
|
|
Side view, dimensions |
|
|
|
|
Suited for a multifold wall-mounting box with vertical centre distance | 60 mm | 71 mm | ||
Suited for a multifold wall-mounting box with horizontal centre distance | 71 mm | 71 mm | ||
Load Table
The connected motor control, Zigbee® is suitable to switch 230 V motors of max 3 A
Specifications
| Specification | Value | |
|---|---|---|
Article number | 552-723X1 | |
EAN 552-72301 | 5413736368040 | |
EAN 552-72321 | 5413736368460 | |
EAN 552-72311 | 5413736368422 | |
EAN 552-72331 | 5413736385504 | |
Maximum load | 3 A | |
| Power supply | 230 Vac ± 10%, 50 Hz | |
| Stand-by power | 0.35 W | |
| Circuit Breaker | Maximum MCB rating C16* | |
Wire capacity | 2 x 2.5 mm2 | |
Protocol | Zigbee® 3.0, 2.4 GHz | |
| Mounting method | Flush-mounting box | |
| Flush-mounting box specifications (also see the below image) | ||
A. Depth | Min. 40 mm (cabling space included) | |
B. Claw/screw fixing | 60 mm | |
| C. Inner diameter box | 60 mm | |
D. Multifold boxes centre distance horizontal | 71 mm* | |
| E. Multifold boxes centre distance vertical | 71 mm* | |
| F. Multifold boxes centre distance vertical for BE and FR | 60 mm* | |
Mounting height | 110 - 120 cm | |
| Modification of settings | ||
Stand-alone mode | Buttons on front panel, behind the central plate | |
| Connected mode | Niko Home Control programming software Niko Home app | |
Maximum range (between motor control and smart hub or wireless bridge) | 10 m (Longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices) | |
| Maximum per installation | Max. 50 connected Zigbee® devices | |
| Operating frequency | 2.4 GHz | |
| Maximum RF power | 10 dBm | |
Protection degree | IP20 | |
| Ambient temperature | 0 – 40 °C | |
| Dimensions (HxWxD) | ||
| Weight | 70 g | |
| Marking | CE, Zigbee® | |
| * To be installed in accordance with the national regulations | ||
