Skip to main content
Skip table of contents

Digital black, 230 V


Description

Digital black, 230 V is a completely customisable touchscreen which has an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near, so you can switch or dim your lights, set moods, set ventilation modes, adjust blinds and sun blinds to the desired position, in one operation. In short, all possible types of controls are available in your Niko Home Control system. Do you have a Niko Home Control thermostat (550-13050)? Then you can easily set the temperature with the Digital black. With the Niko Home app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the respective app store for your mobile device.

The screen can be easily mounted in any standard flush-mounting box and is powered on 230 Vac. This 230 Vac variant is equipped with a switching contact 10 A (resistive), meaning that it can replace a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional connected control points from the Niko Home Control range for traditional wiring, you can easily add additional automation to your traditional installation.

Overview

551-1800x

Dimensions

Required parts

A complete Digital black, 230 V consists of the following parts:

  • Digital black, 230 Vac, claw fixing 551-18000
    or
  • Digital black, 230 Vac, screw fixing 551-18001

Usage

  • The Digital black, 230 V can be used to control actions and routines programmed in your Niko Home Control installation on both bus wiring or traditional wiring systems.
  • The Digital black can visualise up to 12 controls.
  • The Digital black is equipped with a switching contact 10 A (resistive), meaning that it can easily replace a conventional single-pole switch. You need an L and N wire available in the wall mounting box to make this Digital black 230 V working. See the Installation af Digital black, 230 V page for more details.
  • The switching contact has the same functionality as a connected single switch in a Niko Home Control installation with a wireless smart hub (552-00001). 

The Digital black 230 V supports different controls depending on the mode in which it is used. See the Sådan bruger du din Digital black, 230 V page for more information about the two modes.

Standalone useConnected use (connected to your Niko Home Control installation)
  • On/off
  • On/off
  • Dimming
  • Blinds, shutters and stores
  • Ventilation
  • Audio
  • Moods
  • Temperature visualisation for the Niko Home Control thermostat (550-13050) on bus wiring. The Digital black, 230 V only shows the control and is not equipped with a sensor or algorithm. You cannot use the Digital black, 230 V as a zone thermostat.
  • Reynaers sliding window control (for Niko Home Control installation with connected controller)
  • Velux window control (for Niko Home Control installation with connected controller)

Control


With the Niko home app you can do the following:

  • You can select, edit and re-order controls
  • You can visualise up to 12 controls.
  • You can change the visualisation of the controls. Currently, 2 views are supported:
    • Carousel view
    • Grid view

Known limitations

  • The Digital black, 230 V cannot be used as a Niko Home Control thermostat. You need to install a Digital black 24 V to activate thermostat function in your Niko Home Control installation with a connected controller. 
  • The Digital black, 230 V needs an L and N wire in the wall mounting to make it work. In case of renovation, check your cabling first. See the Installation af Digital black, 230 V page.

Specifications

Specification

Value

Article number

551-1800x

Power supply230 Vac ± 10%, 50 Hz
Maximum power consumption5.5 W
Power consumption (standby)1 W
Max. inrush current100 A

Max. load low voltage halogen lamps with electromagnetic transformer (inductive loads, cosφ=0.6)

10 A

Max. load 230 V incandescent lamps and 230 V halogen lamps (resistive loads, cosφ=1)

2300 W

Max. load LED lamps and compact fluorescent lamps (CFL) with build-in electronic driver/ballast

100 W

Max. load fluorescent tube/lamps, low voltage halogen lamps and (LED) lamps with external electronic driver/ballast/transformer

10 A
Mounting methodWall flush-mounting, screw or claw
Mounting height110 - 160 cm
Weight70 g
Ambient temperature0 – 40 °C
Dimensions (HxWxD) (mechanism)75 x 70 x 31.5 mm
Dimensions (HxWxD) (screen)83 x 83 x 11.5 mm
Screen size3.6”
Screen resolution1024 x 768 pixels
Screen brightnessAutomatic
Proximity sensor0 - 30 cm
Modification of settingsNiko Home Control programming software
ConfigurationNiko Home app
CommunicationWi-Fi 2.4 GHz bgn (HT20)
System compatibilityNiko Home Control II
Maximum frequency power15.19 dBm
Maximum number of Digital blacks per installation20
Wire capacity1 x 2.5 mm2 or 2 x 1.5 mm2
Protection degreeIP40
MarkingCE
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.