How to install the latest version of Niko Home Control II

System requirements

As of version 2.25, the Niko Home Control programming software is no longer tested and debugged for Windows 10. It is recommended to upgrade to Windows 11.

Installation instructions

Uploading and upgrading can be done both with a wired and wireless connection between the pc and the installation. However, we strongly recommend using the wired connection as it is more stable and safer.

If you are installing the software for the first time:

Download the software from the Niko website.

Unzip the downloaded file, you will receive 4 files:

1. README.txt: this file contains the installation instructions

2. Dwg file:

   1. The installation of the programme will start as soon as you open this file (follow the steps on the screen)

   2. If your PC is connected to the internet, the software will suggest a download of a more recent version, if available. We recommend always using the latest version since it will contain the latest functionalities and bug fixes.

3. NikoTouch2OS.zip en NikoTouch3OS.zip:

   1. These files are required for the activation of each second-generation (550-20101) or third-generation (550-20102) touchscreen. You can recognize these touchscreens by the presence of a USB port at the bottom of the screen. Other touchscreens cannot be used in a Niko Home Control II installation.

   2. Do not unzip this file under any circumstances.

   3. Copy the zip file to an empty FAT32 formatted USB stick. Make sure to use the "safely remove hardware" option when removing the USB stick from a Windows PC.

   4. Plug the USB stick in the USB port at the bottom of the touchscreen and follow the instructions on the screen. The touchscreen will automatically recognize the correct zip file and start the upgrade.

   5. Later upgrades will be installed automatically. An active internet connection is required.

If you have installed a previous 2.x software:

1. Make sure your computer has an active connection to the internet.

2. Open the installed programming software on your computer. The software indicates that a new version is available. Confirm that you want to upgrade.

3. If the programming software indicates an upgrade is available for the connected controller, please perform this upgrade.
   If you haven't received this notification, it means your computer hasn't connected to your connected controller yet. Close the software and connect your computer to your connected controller. Open the programming software again. You will now see the upgrade for the connected controller and you can perform it.

4. The software confirms your installation is up to date.

5. Upgrade the touchscreens:

   1. If you have a touchscreen 550-20102, this touchscreen will also indicate that an upgrade is available. Follow the steps on the screen to download and install the upgrade. You only need an active internet connection.

   2. If you have a touchscreen 550-20101, it must be upgraded with the USB stick, according to the procedure described above (see: If you are installing the software for the first time).

General recommendations

• If your Niko Home Control installation is programmed using version 1.x of the programming software, it is strongly recommended to convert from 1.x to 2.x for security reasons. Please follow these upgrade instructions.

• It is best practice to upgrade your entire Niko Home Control installation with the latest firmware (using the programming software) before you make changes to its configuration.

• Each installation must be registered with the MAC address and the serial number of the controller or hub, see Register your installation.