Skip to main content
Skip table of contents

Connected dimmer, Zigbee®, 3 - 200 W, 2-wire, Swiss line

Description

This Zigbee® dimmer allows you to operate and dim lighting circuits.

You can perfectly install this dimmer in new construction projects and use it to replace a conventional dimmer in renovation projects without cutting, grinding or adding electrical wires. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching.

The connected dimmer, Zigbee® operates in 2 modes: stand-alone and connected mode.

In stand-alone mode, it is not connected to a smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.

In connected mode, it is connected to a smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:

  • Add the connected dimmer to a scene or all-off function
  • Control additional lighting circuits (apart from the one wired to the connected Zigbee® dimmer)
  • Link it to a warning (all-on) function, routines, calendar or scheduling functions
  • Enable, disable or invert the feedback LED
  • Control the connected dimmer via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x551-1800x) or remotely via a smart device with the Niko Home app

When connected to your Niko Home Control installation, the connected dimmer, Zigbee® will automatically be upgraded to the latest firmware version.

Overview

There is 1 mechanical variant that fits Swiss wall-mounting boxes. The Niko Zigbee® Swiss line series is compatible with the finishings from the Feller EDIZIOdue colore series.
More details can be found under Installation.

Article number

101-72211-41

Front view

Required Parts

Connected dimmer, Zigbee®, Swiss line

A complete connected dimmer, Zigbee®, Swiss line consists of the following parts:

  • 1 base

Choose one from the table below:

Article number

Description

101-72211-41

Connected dimmer, Zigbee®, with Swiss line metal base, adapter frame and white central plate with lens, screw fixing

  • 1 faceplate
    The Niko Zigbee® Swiss line series is compatible with the faceplates from the Feller EDIZIOdue colore series (to be ordered separately). 

Optional Parts

LED compensator

Article number

Description

310-05001

This optional LED compensator solves lamp flicker, ghosting and popcorning effects. It can also be used as an electric load when connecting the Zigbee® dimmer to your Niko Home Control installation if there are no lamps available on the construction site

Single push-button extension

If you wish, you can attach one or more single push buttons to the extension terminals of the connected dimmer, Zigbee®.
Select Niko push buttons from the 170-X00XX range with central plate (XXX-61105 or XXX-60X05) and faceplate (Pure, Intense, Original).
Alternatively, if you would like the same design as the Swiss line Zigbee® devices, you can purchase normally open (N.O.) push buttons from Feller with the EDIZIOdue colore design.

Control

Technical data

Dimensions

Article number

101-72211-41

Fixation type

Screw

Front view, dimensions

Side view, dimensions

Load Table

Below table gives an overview of the permitted loads at an ambient temperature of 35°C.

Specifications

SpecificationValue

Article number

101-72211-41 

EAN

5413736388048

Maximum load

200 W / 200 VA (depending on the type of load as well as the ambient temperature – see power consumption graph)
Power supply230 Vac ± 10%, 50 Hz
Stand-by power0.35 W
Circuit Breaker Maximum MCB rating 16 A*

Wire capacity

1 x 2.5 mm2

Protocol

Zigbee® 3.0, 2.4 GHz
Mounting methodFlush-mounting box
Flush-mounting box specifications (also see the below image)






A. Depth

Min. 40 mm (cabling space included)

B. Screw fixing

78 mm diagonal (for single application)

C. Inner diameter boxMin. 60 mm

D. Multifold boxes centre distance horizontal

60 mm*
E. Multifold boxes centre distance vertical

60 mm*

Mounting height 

110 - 120 cm
Modification of settings 


Stand-alone mode

Buttons on front panel, behind the central plate
Connected mode

Niko Home Control programming software

Niko Home app

Max cable length extension switches

50 m

Maximum range (between dimmer

and smart hub)

10 m (Longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices)
Maximum per installationMax. 50 connected Zigbee® devices
Operating frequency2.4 GHz
Maximum RF power10 dBm

Protection degree

IP20
Ambient temperature    0 – 35 °C
Dimensions (HxWxD)

77 x 77 x 30.9 mm

Weight                                               92 g ±1g
MarkingCE, Zigbee®
* This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.