Skip to main content
Skip table of contents

Connected motor control, Zigbee®, 3 A, Swiss line

Description

This Zigbee® motor control allows you to switch a 230 V motor of max. 3 A from automatic roll-down shutters, sun blinds, or venetian blinds.

You can perfectly install this connected motor control in new construction projects and use it to replace a conventional motor control in renovation projects without cutting, grinding or adding electrical wires.

The connected motor control, Zigbee® operates in 2 modes: stand-alone and connected mode.

In stand-alone mode, it is not connected to a smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.

In connected mode, it is connected to a smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:

  • Add the connected motor control to a scene or all-off function

  • Control additional lighting circuits (apart from the one wired to the connected Zigbee® switch)

  • Link it to a warning (all-on) function, routines, calendar or scheduling functions

  • Enable, disable or invert the feedback LED

  • Control the connected motor control via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x551-1800x) or remotely via a smart device with the Niko Home app

When connected to your Niko Home Control installation, the connected motor control, Zigbee® will automatically be upgraded to the latest firmware version.

Overview

There is 1 mechanical variant that fits Swiss wall-mounting boxes. The Niko Zigbee® Swiss line series is compatible with the finishings from the Feller EDIZIOdue colore series.
More details can be found under Installation.

Article number

101-72311-41

Front view

Required Parts

Connected motor control, Zigbee®, Swiss line

A complete connected motor control, Zigbee®, Swiss line consists of the following parts:

  • 1 base

Choose one from the table below:

Article number

Description

101-72311-41

Connected motor control, Zigbee®, with Swiss line metal base, adapter frame and white central plates with lenses, screw fixing

  • 1 faceplate

The Niko Zigbee® Swiss line series is compatible with the faceplates from the Feller EDIZIOdue colore series (to be ordered separately).

Control

Technical data

Dimensions

Article number

101-72311-41

Fixation type

Screw

Front view, dimensions

Side view, dimensions

Load Table

The connected motor control, Zigbee® is suitable to switch 230 V motors of max 3 A


Specifications

SpecificationValue

Article number

101-72311-41

EAN

5413736387799

Maximum load

3 A
Power supply230 Vac ± 10%, 50 Hz
Stand-by power0.35 W
Circuit Breaker Maximum MCB rating 16 A*

Wire capacity

2 x 2.5 mm2

Protocol

Zigbee® 3.0, 2.4 GHz
Mounting methodFlush-mounting box
Flush-mounting box specifications (also see the below image)






A. Depth

Min. 40 mm (cabling space included)

B. Screw fixing

78 mm diagonal (for single application)

C. Inner diameter boxMin. 60 mm

D. Multifold boxes centre distance horizontal

60 mm*
E. Multifold boxes centre distance vertical

60 mm*

Mounting height 

110 - 120 cm
Modification of settings 


Stand-alone mode

Buttons on front panel, behind the central plate
Connected mode

Niko Home Control programming software

Niko Home app

Maximum range (between motor control

and smart hub)

10 m (longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices)
Maximum per installationMax. 50 connected Zigbee® devices
Operating frequency2.4 GHz
Maximum RF power10 dBm

Protection degree

IP20
Ambient temperature    0 – 40 °C
Dimensions (HxWxD)

77 x 77 x 29 mm

Weight                                               95 g ±1g
MarkingCE, Zigbee®
* This product must be secured with a miniature circuit breaker of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.