353-651021
Read the manual completely before installing and activating the system.
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
Applicability
This link takes you to the product page. There, you will find detailed specifications, all compatible articles, certificates of CE-marking, etc.
This online manual is applicable to the following product(s):
Operation and use
Wiring
This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
230 V – OFF / DALI power – OFF
The product acts as secondary detector in the following configuration:
* Products that are used in the DALI zones must be secured with a miniature circuit breaker (MCB) as specified by their supplier. The connection to the DALI zones in this wiring diagram purely serves as an example.
Compatible master detectors | Mounting method |
|---|---|
353-652321, 353-752321, 353-852411 | Surface mounting |
353-651321, 353-751321 | Flush mounting (SnapFit) |
353-650321, 353-750321 | Flush-mounting box |
The product acts as secondary detector in the following configuration:
* Products that are used in the DALI zones must be secured with a miniature circuit breaker (MCB) as specified by their supplier. The connection to the DALI zones in this wiring diagram purely serves as an example.
Compatible master detectors | Mounting method |
|---|---|
353-652421, 353-752421 | Surface mounting |
353-651421, 353-751421 | Flush mounting (SnapFit) |
The product acts as BMS detector in the following configuration:
Detection area
Mounting height  | A Walking  | B Across  | C Towards  | D Presence  |
|---|---|---|---|---|
2.5 m | ø 13 m | ø 11 m | ø 3 m | ø 5 m |
3.0 m | ø 12 m | ø 12 m | ø 3 m | ø 5 m |
Measured according to EN/IEC 63180
Dimensions
Installation
230 V – OFF / DALI power – OFF
Not removable (fixed ceiling) | |
|---|---|
Step 1 | |
 |  76 mm |
 | |
Step 2 | |
 9,5 – 40 mm |  0,2 – 9 mm |
Step 3 | |
a | b |
 |  |
Step 4 | |
 | |
a | b |
Use the wiring diagram to connect the wires correctly.  |  |
c | d |
 |  |
Step 5 | |
a | b |
 |  * A lens cover is optional. Check compatibility in the specification of the lens cover at www.niko.eu |
Removable (suspended ceiling) | |
|---|---|
| 76 mm |
Step 1 | |
 | |
Step 2 | |
 9,5 – 40 mm |  0,2 – 9 mm |
Step 3 | |
a | b |
| |
Step 4 | |
| |
a | b |
Use the wiring diagram to connect the wires correctly. | |
c | d |
| |
Step 5 | |
a | b |
| * A lens cover is optional. Check compatibility in the specification of the lens cover at www.niko.eu |
App settings
230 V – ON / DALI power – ON
Download the app on Google Play (Android) or in the App Store (iOS)
Enable Bluetooth® on your mobile device.
Open the app “Niko detector tool” on your mobile device.
Change the settings to your liking.
Setting | Luminosity | Delay | |
|---|---|---|---|
Factory settings | Switch ON/OFF | 500 lux | 15 min |
  |
 |   |
LED behaviour
230 V – ON / DALI power – ON
 | Green LED continuous on | Connection OK | |
 | Green LED breathing | Connection OK, overrule ON | |
 | Green LED flashing | Warming up* | Wait |
 | Red LED continuous on | Error | More info:  Detector tool app |
 | Red LED flashing | Warning | |
 | Blue LED flashing | Walk test active |
* When Bluetooth® communication is disabled, the green LED does not flash while warming up.
Troubleshooting
Problem | Possible cause | Proposed solution |
|---|---|---|
Load does not turn on | The wiring is not correct | Check the wiring scheme |
The ambient light is too strong | Check the response value luminosity and raise the value if necessary | |
Load does not turn off | The switch-off delay is too long | Check the switch-off delay and shorten the delay if necessary |
The detector receives false triggers | Check for any objects that may cause false triggering and remove them from the detection range or lower the sensitivity | |
App cannot connect to the detector | Bluetooth® has been disabled on your mobile device | Enable Bluetooth® on your mobile device |
Legal information
Support & Contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
+32 3 778 90 80
support@niko.eu
Warnings regarding installation
The installation of products that will permanently be part of the electrical installation and which include dangerous voltages, should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.
CE marking
This product complies with all of the relevant European guidelines and regulations. For radio equipment Niko llc declares that the radio equipment in this manual conforms with the 2014/53/EU directive. The full text of the EU declaration of conformity is available at https://www.niko.eu under the product reference, if applicable.
Environment
This product and/or the batteries provided cannot be disposed of in non-recyclable waste. Take your discarded product to a recognised collection point. Just like producers and importers, you too play an important role in the promotion of sorting, recycling and reuse of discarded electrical and electronic equipment. To finance the rubbish collection and waste treatment, the government levies recycling charges in certain cases (included in the price of this product).