Push buttons for the motor control of roll-down shutters, sun blinds and awnings

Description

Push buttons for motor control are available in single or double versions. The single push button consists of three action buttons, while the double push button has six. With these push buttons, you can operate the motors of one or two groups of roll-down shutters, sun blinds or awnings connected to the Niko Home Control installation.

The action buttons on each push button are arranged in groups of three. Each group con- sists of action buttons A, B and C, for which the action is pre-defined. The action buttons can also be equipped with indication LEDs. The LED lights up or swit- ches off every time you press the action button. During the programming of the installati- on, the installer will determine whether the LED lights up or switches off when you have pressed the action button.

Use

If the roll-down shutter, sun blind or awnings are in motion, you can stop them by pressing one of the action buttons. Every press of the action button stops their motion.

Use of action button A

Action	Result
Briefly press A.	You will fully raise the roll-down shutter.
Press and hold A.	You will move the roll-down shutter to the desired position. The roll- down shutter will stop as soon as you release the action button.

Use of action button B

You can adjust and configure the preferred position of the roll-down shutter yourself with action button B. The standard setting for this is approximately mid-position.

Action	Result
Move the roll-down shutter to the desired po- sition and keep B pressed down for longer than three seconds.	You have now programmed your own preferred settings with this action button.
Briefly press on B.	You will move the roll-down shutter to the preferred position.

Use of action button C

Action

Result

Briefly press C.

You will fully lower the roll-down shutter.

Press and hold C.

you will lower the roll-down shutter to the desired position. The roll- down shutter will stop as soon as you release the action button.