Electrical heating

What is electrical heating?

With the routine Electrical heating you can connect a thermostat, a push button with LED(s) and comfort sensors, or a Digital black 24 V to an electrical heating system.

The Digital black 230V cannot be used as a thermostat.

Starting point

• You have created the following:

  • for a new installation: a push button with LED(s) and comfort sensors or a Digital black 24V

  • for an existing installation: a thermostat, a push button with LED(s) and comfort sensors, or a Digital black 24 V

  • electrical heating

• You are in the Create overview window.
  

  

Procedure

1. In the right-hand button bar, click on the button Routine.
   Result:
   The Routine pane appears.
   

   

   
   

2. Choose the room as follows:

   • Choose Room from the drop-down list.

   • Click on the room in the drawing area.
     

     

3. Click on the arrow next to the category Climate control.
   

   

4. Click on Electrical heating.

5. Give the routine a name.

6. Set the behaviour as follows:

   Behaviour	What?	How?
   A	Choose the thermostat, the push button with LED(s) and comfort sensors or the Digital black 24 V which will control the electrical heating in a certain area.	1 Click on the symbol of the control. 2 Click on the electrical heating device you want to control with this control. The selected control and electrical heating together form an area.

   
   

   

   At least one device is required for behaviour A. If you do not add this device, the routine symbol will show a warning. Underneath the behaviour, the following message will be displayed: you have to add at least one device to complete the area.

   
   

7. Repeat the steps above to create electrical heating areas for other rooms as desired. Each time, click on the control first and then on the corresponding electrical heating.

Video

See an example here. Turn on the sound to watch the video.

https://www.youtube.com/embed/G8m6drUx-a0