Skip to main content
Skip table of contents

Push buttons with LED(s) and comfort sensors


The push buttons with LED(s) and comfort sensors (xxx-5220x), available in all Niko finishings, include one or more action buttons that allow you to control a variety of basic actions and routines configured in the Niko Home Control programming software. 
Within the programming software, each action button can be assigned to any kind of basic action or routine created.

These push buttons are equipped with feedback LED(s) and comfort sensors.

The comfort sensors can be used to perform heating, cooling, and ventilation actions and allow you to increase your energy efficiency while maintaining overall comfort.

  • Its temperature sensor can be set to control a multi-zone heating/cooling within a Niko Home Control II installation, as a basic thermometer or to create certain conditions (e.g. control sunscreens).
  • The humidity sensor can also be used within routines. For example, to perform automatic ventilation control in a bathroom or toilet.

Moreover, these push buttons are fitted with programmable LEDs that provide (inverted) feedback on the action that is being performed and that can also be used as an orientation light.

  • These buttons are available from Niko Home Control programming software version 2.19.
  • For more details on the use of the comfort sensors and the feedback LED behaviour, see Programming.


Technical data

Electrical data

  • Maximum number of push buttons set as a temperature sensor per installation: 20
  • Temperature sensor range: 0   40°C
  • Temperature sensor accuracy: ± 0.5°C
  • Temperature sensor calibration: Via the Niko Home Control II programming software
  • Humidity sensor range: 0   100 % RH (non-condensing, nor icing)
  • Humidity sensor accuracy: ±5 %, between 20 - 80 % RH at 25 °C
  • Input voltage: 26 Vdc (SELV, safety extra-low voltage)

Mechanical data

  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass
  • Lens: The key on the push button is fitted at the bottom with a small amber-coloured LED (1.5 x 1.5 mm) to indicate the status of the action
  • Set points and week programs are managed via the Niko Home app
  • Calibration is managed via the programming software
  • Fire safety
    • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
    • The plastic parts of the central plate are halogen-free
  • Impact resistance: After mounting, an impact resistance of IK06 is guaranteed
  • Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
  • Complies with the European standards EN 60669-2-1, EN 63044-3, EN 63044-5-2
  • Marking: CE
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.