Skip to main content
Skip table of contents

Connected motor control, Easywave # technology, 3 A

Description

The connected motor control contains a switching contact to control a 230V motor. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control.

You can use the connected motor control to replace a conventional motor control.

The connected motor control can switch its own contacts.

With the addition of the wireless smart hub for Niko Home Control, it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a mood or all-off function.

Overview

551-723x1

Control

Wiring

Switch off the mains.

Installation



Dismantling

Switch off the mains.

Settings

In an installation without a wireless smart hub, the switch will control the wired motor. The run time wil be set to 90 s. More advanced options become available if you use a wireless smart hub and the Niko Home Control programming software.

Download the Niko Home Control programming software:


Reset


You can watch the tutorial here:

Technical data

Dimensions in mm

551-72301551-72321551-72311

Specifications

Specification

Value

Article number551-723x1
Power supply230 Vac
ProtocolProprietary
Mounting methodWall mounting
Mounting height110 - 120 cm
Weight70 g
Ambient temperature0 - 40 °C
Dimensions (HxWxD) - 551-72301, 551-7232171.5 x 73 x 40 mm
Dimensions (HxWxD) - 551-72131173 x 73 x 40 mm
Protection degreeIP20
Modification of settingsNiko Home Control prgramming software (requires wireless smart hub 552-00001)
Maximum range (from switch to wireless smart hub)30 m
Operating frequency869.05 MHz
Maximum frequency power6 dBm
Wire capacity2 x 2.5 mm2
MarkingCE
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.