Connected double switch, Zigbee®, 2 x 10 A, Swiss line

Description

This Zigbee^® switch allows you to operate lighting circuits.

You can perfectly install this smart switch in new construction projects and use it to replace a conventional switch in renovation projects without cutting, grinding or adding electrical wires. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching.

The connected double switch, Zigbee^® operates in 2 modes: stand-alone and connected mode.

In stand-alone mode, it is not connected to a smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.

In connected mode, it is connected to a smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:

• Add the connected switch to a scene or all-off function

• Control additional lighting circuits (apart from the one wired to the connected Zigbee^® switch)

• Link it to a warning (all-on) function, routines, calendar or scheduling functions

• Enable, disable or invert the feedback LED

• Control the connected switch via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x, 551-1800x) or remotely via a smart device with the Niko Home app

Overview

There is 1 mechanical variant that fits most European wall-mounting boxes. The Niko Zigbee^® Swiss line series is compatible with the finishings from the Feller EDIZIOdue colore series.
More details can be found under Installation.

Required Parts

Double connected switch, Zigbee®, Swiss line

A complete connected double switch, Zigbee®, Swiss line consists of the following parts:

• 1 base

Choose one from the table below:

• 1 faceplate

The Niko Zigbee^® Swiss line series is compatible with the faceplates from the Feller EDIZIOdue colore series (to be ordered separately). 

Optional Parts

Double push-button extension

If you wish, you can attach one or more double push-button extensions to the extension terminals of the double connected switch, Zigbee^®.
Select Niko push buttons from the 170-X00XX range with central plate (XXX-61105 or XXX-60X05) and faceplate (Pure, Intense, Original).
Alternatively, if you would like the same design as the Swiss line Zigbee^® devices, you can purchase normally open (N.O.) push buttons from Feller with the EDIZIOdue colore design.

Control

Technical data

Dimensions

Load Table

Below table gives an overview of the permitted loads at an ambient temperature of 40°C.

Specifications