Bulex

What can you do with Bulex and Niko Home Control?

Manage multi-zone heating and cooling with your heat pump

If you connect your heat pump or heat pump boiler to Niko Home Control, you can control it via the Niko Home app on a tablet or smartphone, the Touchscreen and/or Digital black.

You can control multiple rooms individually, using the following actions:

• Check and set the room temperature

• Choose programs and modes (e.g., home, away, vacation)

• Set up a weekly program

We recommend the following options to make even better use of this connection:

• Include the away mode in the all-off routine; see Basic all-off.

• Turn off the heating when the windows/doors are open; see Custom routine.

What do you need?

Niko requirements

Your Niko Home Control installation meets the following requirements:

• It has a wireless smart hub or a connected controller II.

• It is configured with the most recent programming software.

• It has an active internet connection.

• It is registered and you have your e-mail address and password on hand.

• If you want to use the Bulex functions in combination with Niko Home Control actions, these actions need to be programmed with the Niko Home Control programming software after the link has been activated.

Bulex requirements

Your system meets the following requirements:

• It has an active internet connection.

• It is a Bulex heat pump or heat pump boiler having a Bulex communication unit and you have the serial number of the communication unit on hand.

• It has one of the following thermostats:

  • Thermostat supported by the MiGo app

  • Thermostat supported by the MiGo Link app

You can find the serial number of the communication unit on the following locations:

• On the backside or the inside of the unit below the barcode

• In the MiGo app or MiGo Link app

Programming

Integráciu partnerských systémov môžete (de)aktivovať pomocou programovacieho systému Niko Home Control. Požiadajte o pomoc profesionálneho inštalatéra. Požiadavky a podrobné pokyny nájdete v návode k softvéru.

Akékoľvek základné akcie a režimy prepojené s vaším partnerským systémom sa takisto aktualizujú prostredníctvom programovacieho softvéru.

• Prepojenie môžete aktivovať cez informačný panel. Postup nájdete tu.

• Prepojenie môžete takisto deaktivovať cez informačný panel. Postup nájdete tu.
  Po deaktivovaní prepojenia dôjde k nasledujúcej situácii:

  • Súvisiace funkcie z aplikácie Niko Home Control zmiznú.

  • Vaše súvisiace údaje v aplikácii Niko Home Control sa stratia.

Depending on the type of heat pump system, the following functions automatically appear in your Niko Home app and on your touchscreens after you activate the link between both systems:

	System supported by MiGo app	System supported by MiGo Link app
Check and control the room temperature (one zone)
Check and control the room temperature (more zones)
Check the outside temperature
Choose the heating program mode (e.g. home, away)
Choose the operation mode (e.g. summer, winter, frost guard)
Check and boost the temperature of the hot water system
Choose the heating program mode (off, manual, schedule, away, boost*)

*Boost is only available for domestic hot water.

You can always use the MiGo app or MiGo Link app for more advanced settings and configurations.