Skip to main content
Skip table of contents


What can you do with Niko Home Control?

You can have the audio functions directly available in your Niko Home app, Digital black or on your touchscreen. You can also combine them in routines and/ or conditions to control multiple devices simultaneously at the simple press of a button (e.g. activate a diner scene that sets the lights to the correct level and turns the music on).

By using Niko Home Control with your Bose system, you can do the following:

  • Start and stop the music
  • Control the volume
  • (Un)-mute the music
  • Select a playlist from your favourites
  • Use the speakers in routines
  • Use the speaker(s) in conditions (then/else) 

  • The available functionality within Niko Home Control depends upon the specific installation features of the Bose system.
  • You can always use the Bose app for more advanced settings and configurations.

What do you need?

  • No additional electrical wiring is required.
  • You have connected both systems to the same home network via cable and/or Wi-Fi.

Your Niko Home Control installation meets the following requirements:

  • Your Bose speaker(s) are SoundTouch compatible (e.g. SoundTouch 10, 20 or 30).
  • In the case of brand-new speakers, you have completed the commissioning procedure, and you have connected the speakers to your home network via Wi-Fi or cable (depending on the speakers specifications).

How do you activate the link between your Niko Home Control and your Bose system?

  1. Check if you have everything you need (see above ).
  2. Add the speaker(s) to the floor plan.
  3. Create a basic action with the speaker(s). The speaker(s) is/are controlled with the app, a touchscreen or a Digital black.
  4. Add the speaker(s) to the desired routines and/or conditions .
  5. Address the speaker(s).
  6. Upload the configuration file to your installation.

How do you deactivate the link between your Niko Home Control and your Bose system?

  1. Remove  the speaker(s) from the floor plan.
  2. Upload the configuration file to your installation.

After deactivating the link, the following happens:

  • The Bose functions disappear from your Niko Home app, your touchscreens and Digital blacks.
  • When used in Niko Home Control routines, the Bose functions will not be executed anymore.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.