Hardware manual Niko Original, Niko Intense, Niko Pure, Niko Rocker and Niko Toggle
Hardware manual Niko Original, Niko Intense, Niko Pure, Niko Rocker and Niko Toggle

Assembly

Installation instructions

Niko Original, Niko Intense and Niko Pure

Single flat RJ connection

https://dam.nikocdn.eu/asset/167528/guideImage/170-65901_TG_002.png


Mounting steps

  1. Click the (already wired) connector into the adaptor.

  2. Click the adaptor into the centre of the base.

  3. Mount the base in the flush-mounting box.

  4. Click the central plate onto the base.

  5. Click the faceplate onto the base.

Check the article numbers for this combination on the Niko website.

Double flat RJ connection

https://dam.nikocdn.eu/asset/167527/guideImage/170-65901_TG_001.png


Mounting steps

  1. Click each (already wired) connector into the adaptor.

  2. Click the two adaptors into the base.

  3. Mount the base in the flush-mounting box.

  4. Click the central plate onto the base.

  5. Click the faceplate onto the base.

Check the article numbers for this combination on the Niko website.

Double oblique RJ connection

https://dam.nikocdn.eu/asset/167530/guideImage/170-65904_TG_001.png


Mounting steps

  1. Click each (already wired) connector into the adaptor
    Attention: the connector needs to be mounted with the Niko logo upside down

  2. Click the adaptor into the base.

  3. Mount the base in the flush-mounting box.

  4. Click the central plate onto the base.

  5. Click the faceplate onto the base.

Check the article numbers for this combination on the Niko website.

Niko Rocker and Niko Toggle

Double RJ connection – UTP

https://dam.nikocdn.eu/asset/167529/guideImage/170-65905_TG_001.png


Mounting steps

  1. Click each (already wired) connector into the adaptor.

  2. Click the two adaptors into the base.

  3. Mount the base in the flush-mounting box.

  4. Click the faceplate onto the base.

Check the article numbers for this combination on the Niko website.

Double RJ connection – STP

https://dam.nikocdn.eu/asset/167531/guideImage/170-65906_TG_001.png


Mounting steps

  1. Click each (already wired) connector into the adaptor.

  2. Click the inserts into the adaptors, on top of the installed connectors (the insert is included in the packaging of the adaptor).

  3. Click the two adaptors into the base.

  4. Mount the base in the flush-mounting box.

  5. Click the faceplate onto the base.

Check the article numbers for this combination on the Niko website.

nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium

http://www.niko.eu

+32 3 778 90 80
support@niko.eu