Uploading

Starting point

You have created basic actions, routines and/or conditions.
You have completed the menus Fill cabinet and Address .
Your computer is connected to the installation.
Click on the Upload button.

Steps

The uploading of an installation takes place in several steps.

Step		Description	Possible result	Action
1	Validate	Check the configuration.	The configuration is incomplete.	To ignore the warning: click on Continue.
			The configuration is incomplete.	To remove the warning: solve the problem in the Create, Fill cabinet or Address menu.
			Validation is OK.	Automatically on to step 2.
2	Connect	Check the connection between the connected controller and the computer.	There is no connection.	Check whether the connected controller and the computer are connected correctly and click on Retry.
2	Connect		There is a connection.	Automatically on to step 3.
3	Check for upgrades	Check the firmware of the connected Niko Home Control installation for upgrades.	More recent firmware is available.	Automatically on to step 4.
3	Check for upgrades		No more recent firmware is available.	Automatically on to step 5.
4	Upgrade	Show more recent firmware versions and estimated time.	N/A	Click on Start upgrade at the bottom to upgrade the installation. During the upgrade you can follow the progress here.
5	Upload	Upload the configuration to the installation.	N/A	Click on Upload to start uploading. During the upload process you can follow the progress here. You can add free information in the text box, for instance the changes you have made to the configuration.
6	Upload completed	Show possible warnings.	Examples: The configuration contains components which have not been found in the installation. After phase 1 you continued without entering all addresses of all modules.	Analyse the problem and look for a solution. Examples: Add the missing components to your installation. Correct the errors detected during the validation phase.