Connected motor control, Zigbee®, 3 A, Swiss line

Description

This Zigbee^® motor control allows you to switch a 230 V motor of max. 3 A from automatic roll-down shutters, sun blinds, or venetian blinds.

You can perfectly install this connected motor control in new construction projects and use it to replace a conventional motor control in renovation projects without cutting, grinding or adding electrical wires.

The connected motor control, Zigbee^® operates in 2 modes: stand-alone and connected mode.

In stand-alone mode, it is not connected to a smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.

In connected mode, it is connected to a smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:

Add the connected motor control to a scene or all-off function
Control additional lighting circuits (apart from the one wired to the connected Zigbee^® switch)
Link it to a warning (all-on) function, routines, calendar or scheduling functions
Enable, disable or invert the feedback LED
Control the connected motor control via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x, 551-1800x) or remotely via a smart device with the Niko Home app

When connected to your Niko Home Control installation, the connected motor control, Zigbee^® will automatically be upgraded to the latest firmware version.

Overview

There is 1 mechanical variant that fits Swiss wall-mounting boxes. The Niko Zigbee® Swiss line series is compatible with the finishings from the Feller EDIZIOdue colore series.
More details can be found under Installation.

Article number	101-72311-41
Front view

Required Parts

Connected motor control, Zigbee^®, Swiss line

A complete connected motor control, Zigbee^®, Swiss line consists of the following parts:

1 base

Choose one from the table below:

Article number	Description
101-72311-41	Connected motor control, Zigbee^®, with Swiss line metal base, adapter frame and white central plates with lenses, screw fixing

1 faceplate

The Niko Zigbee^® Swiss line series is compatible with the faceplates from the Feller EDIZIOdue colore series (to be ordered separately).

Control

Technical data

Dimensions

Article number	101-72311-41
Fixation type	Screw
Front view, dimensions
Side view, dimensions

Load Table

The connected motor control, Zigbee^® is suitable to switch 230 V motors of max 3 A

Specifications

Specification		Value
Article number		101-72311-41
EAN		5413736387799
Maximum load		3 A
Power supply		230 Vac ± 10%, 50 Hz
Stand-by power		0.35 W
Circuit Breaker		Maximum MCB rating 16 A*
Wire capacity		2 x 2.5 mm²
Protocol		Zigbee^® 3.0, 2.4 GHz
Mounting method		Flush-mounting box
Flush-mounting box specifications (also see the below image)
	A. Depth	Min. 40 mm (cabling space included)
	B. Screw fixing	78 mm diagonal (for single application)
	C. Inner diameter box	Min. 60 mm
	D. Multifold boxes centre distance horizontal	60 mm*
	E. Multifold boxes centre distance vertical	60 mm*
Mounting height		110 - 120 cm
Modification of settings
	Stand-alone mode	Buttons on front panel, behind the central plate
	Connected mode	Niko Home Control programming software Niko Home app
Maximum range (between motor control and smart hub)		10 m (longer ranges possible with the mesh networking capability of 230 V connected Zigbee^® devices)
Maximum per installation		Max. 50 connected Zigbee^® devices
Operating frequency		2.4 GHz
Maximum RF power		10 dBm
Protection degree		IP20
Ambient temperature		0 – 40 °C
Dimensions (HxWxD)		77 x 77 x 29 mm
Weight		95 g ±1g
Marking		CE, Zigbee^®
* This product must be secured with a miniature circuit breaker of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.