- You have created basic actions, advanced actions and/or conditional actions.
- You have completed the menus Fill cabinet and Address.
- Your computer is connected to the installation.
- Click on the Upload button.
The uploading of an installation takes place in several steps.
Check the configuration.
|The configuration is incomplete.|
To ignore the warning: click on Continue.
|To remove the warning: solve the problem in the Create, Fill cabinet or Address menu.|
|Validation is OK.||Automatically on to step 2.|
|Connect||Check the connection between the connected controller and the computer.||There is no connection.||Check whether the connected controller and the computer are connected correctly and click on Retry.|
|There is a connection.||Automatically on to step 3.|
|3||Check for upgrades||Check the firmware of the connected Niko Home Control installation for upgrades.|
More recent firmware is available.
Automatically on to step 4.
|No more recent firmware is available.||Automatically on to step 5.|
|4||Upgrade||Show more recent firmware versions and estimated time.||N/A|
Click on Upgrade at the bottom to upgrade the installation.
|5||Upload||Upload the configuration to the installation.||N/A|
Click on Upload to start uploading.
Under Add version info, you can add free information, for instance the changes you have made to the configuration.
|6||Upload completed||Show possible warnings.|
Analyse the problem and look for a solution.