System requirements
As of version 2.25, the Niko Home Control programming software is no longer tested and debugged for Windows 10. It is recommended to upgrade to Windows 11.
Niko Home Control programming software
Compatible with:
-
Windows 11 or a more recent version, we recommend installing all official Windows updates
-
Mac OS 11 or a more recent version
Other requirements:
-
Minimum 4 GB RAM is recommended
-
Minimum screen resolution 1366 x 768
Niko Home app
Compatible with:
-
Android version 9.0 or higher
-
iOS version 14.0 or higher for iPads and iPhones
Installation instructions
Uploading and upgrading can be done both with a wired and wireless connection between the pc and the installation. However, we strongly recommend using the wired connection as it is more stable and safer.
If you are installing the software for the first time:
Step 1
Download the software from the Niko website. The downloaded ZIP file contains the installation file. Unzip it to a suitable location.
Step 2
Open the file. The installation of the programme starts as soon as you open this file. Follow the steps on the screen.
If your PC is connected to the internet, the software will suggest a download of a more recent version, if available. We recommend always using the latest version since it will contain the latest functionalities and bug fixes.
If you have installed a previous 2.x software:
Prerequisite: Make sure your computer has an active connection to the internet.
Step 1
Open the installed programming software on your computer. The software indicates that a new version is available. Confirm that you want to upgrade.
Step 2
If the programming software indicates an upgrade is available for the connected controller, please perform this upgrade.
If you haven't received this notification, it means your computer hasn't connected to your connected controller yet. Close the software and connect your computer to your connected controller. Open the programming software again. You will now see the upgrade for the connected controller, and you can perform it.
The software confirms your installation is up to date.
Step 3
Upgrade the touchscreens.
Upgrading the touchscreens
The update method depends on the type of touchscreen:
General recommendations
-
If your Niko Home Control installation is programmed using version 1.x of the programming software, it is strongly recommended to convert from 1.x to 2.x for security reasons. Please follow these upgrade instructions.
-
It is best practice to upgrade your entire Niko Home Control installation with the latest firmware (using the programming software) before you make changes to its configuration.
-
Each installation must be registered with the MAC address and the serial number of the controller or hub, see Register your installation.