This Zigbee® motor control allows you to switch a 230 V motor of max. 3 A from automatic roll-down shutters, sun blinds, or venetian blinds.
You can perfectly install this connected motor control in new construction projects and use it to replace a conventional motor control in renovation projects without cutting, grinding or adding electrical wires.
The connected motor control, Zigbee® operates in 2 modes: stand-alone and connected mode.
In stand-alone mode, it is not connected to a smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.
In connected mode, it is connected to a smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:
Add the connected motor control to a scene or all-off function
Control additional lighting circuits (apart from the one wired to the connected Zigbee® switch)
Link it to a warning (all-on) function, routines, calendar or scheduling functions
Enable, disable or invert the feedback LED
Control the connected motor control via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x, 551-1800x) or remotely via a smart device with the Niko Home app
When connected to your Niko Home Control installation, the connected motor control, Zigbee® will automatically be upgraded to the latest firmware version.
Overview
There is 1 mechanical variant that fits Swiss wall-mounting boxes. The Niko Zigbee® Swiss line series is compatible with the finishings from the Feller EDIZIOdue colore series.
More details can be found under Installation.
Article number | 101-72311-41 |
|---|---|
Front view |
|
Required Parts
Connected motor control, Zigbee®, Swiss line
A complete connected motor control, Zigbee®, Swiss line consists of the following parts:
1 base
Choose one from the table below:
Article number | Description |
|---|---|
101-72311-41 | Connected motor control, Zigbee®, with Swiss line metal base, adapter frame and white central plates with lenses, screw fixing |
1 faceplate
The Niko Zigbee® Swiss line series is compatible with the faceplates from the Feller EDIZIOdue colore series (to be ordered separately).
Control
Technical data
Dimensions
Article number | 101-72311-41 |
|---|---|
Fixation type | Screw |
Front view, dimensions |
|
Side view, dimensions |
|
Load Table
The connected motor control, Zigbee® is suitable to switch 230 V motors of max 3 A
Specifications
| Specification | Value | |
|---|---|---|
Article number | 101-72311-41 | |
EAN | 5413736387799 | |
Maximum load | 3 A | |
| Power supply | 230 Vac ± 10%, 50 Hz | |
| Stand-by power | 0.35 W | |
| Circuit Breaker | Maximum MCB rating 16 A* | |
Wire capacity | 2 x 2.5 mm2 | |
Protocol | Zigbee® 3.0, 2.4 GHz | |
| Mounting method | Flush-mounting box | |
| Flush-mounting box specifications (also see the below image) | ||
A. Depth | Min. 40 mm (cabling space included) | |
B. Screw fixing | 78 mm diagonal (for single application) | |
| C. Inner diameter box | Min. 60 mm | |
D. Multifold boxes centre distance horizontal | 60 mm* | |
| E. Multifold boxes centre distance vertical | 60 mm* | |
Mounting height | 110 - 120 cm | |
| Modification of settings | ||
Stand-alone mode | Buttons on front panel, behind the central plate | |
| Connected mode | Niko Home Control programming software Niko Home app | |
Maximum range (between motor control and smart hub) | 10 m (longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices) | |
| Maximum per installation | Max. 50 connected Zigbee® devices | |
| Operating frequency | 2.4 GHz | |
| Maximum RF power | 10 dBm | |
Protection degree | IP20 | |
| Ambient temperature | 0 – 40 °C | |
| Dimensions (HxWxD) | 77 x 77 x 29 mm | |
| Weight | 95 g ±1g | |
| Marking | CE, Zigbee® | |
| * This product must be secured with a miniature circuit breaker of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules. | ||