You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

What can you do with Niko Home Control?

By using Niko Home Control with your Renson system, you can do the following:

  • Control the ventilation speed (e.g. auto, silent)
  • Boost the ventilation

The Renson functions automatically appear in your Niko Home Control apps and your touchscreens after you activate the link between both systems.

Available functionality within Niko Home Control depends upon the specific installation features of the Healthbox 3.0.


What do you need?


In shortExtra information
General
  • No additional electrical wiring is required.
  • You have connected both systems to the same home network via cable and/or Wi-Fi.
A cabled connection is the preferred solution.

Your Niko Home Control installation meets the following requirements:


Your Renson system meets the following requirements:

  • It is a Healthbox 3.0.
  • It is connected to your local home network.


How do you activate the link between your Niko Home Control and your Renson system?

  1. Check if you have everything you need (see above).
  2. Go to https://mynikohomecontrol.niko.eu.
  3. Log in with your e-mail address and password.
  4. Click the  Connected services button. This is where you manage all the services linked to your installation, including the Renson system.

  5. Click the  ALL tab or the Add another service button in the ACTIVE tab.

  6. Click the  Renson logo.

  7. Click Activate.

  8. Follow the instructions on your screen to complete the activation.


How do you deactivate the link between your Niko Home Control and your Renson system?

  1. Log in to  https://mynikohomecontrol.niko.eu with your e-mail address and password.

  2. Click the  Connected services  button. This is where you manage all the services linked to your installation, including the Renson system.

  3. Click the ACTIVE  tab.

  4. Click the three dots next to the Renson logo and click Deactivate.
     

After deactivating the link, the following happens:

  • The Renson functions disappear from your Niko Home Control apps, your touchscreens and Digital blacks.
  • When used in Niko Home Control actions, the Renson functions will not be executed anymore.

How do you update the link settings between your Niko Home Control and your Renson system?

  1. Log in to  https://mynikohomecontrol.niko.eu with your e-mail address and password.

  2. Click the Connected services button. This is where you manage all the services linked to your installation, including the Renson system.

  3. Click the ACTIVE tab.

  4. Click the three dots next to the Renson logo and click Manage this connected service. 


  5. Follow the instructions on your screen.




  • No labels