Skip to main content
Skip table of contents

Touchscreen 2: using the control tab

1. Select the control tab.
The control menu will open. To the left, you will receive an overview of all locations which the installer has con- figured in the programming software. With an upwards or downwards movement over the list, you can scroll through the various alarms and notifications.

2. Select the location from where you would like to consult the available actions.
The installer has configured the various action types and their names in the programming software. Depending on the settings, the following screen might appear, for example:
To the left of the screen, the location which you have selected will light up. If several actions are available, you can scroll right through the various actions using an upwards or downwards motion over the list.

3. Select the action that you wish to control. The various actions are further explained in the section "Controlling the actions".
In the menu bar, select if desired the tab of the menu where you would like to go.
Via niko at the top left, you will go back to the start screen.

4. If you want to modify the symbol of a location, press the three dots to the right of the location and then change symbol.
Remark: If you want to modify the name of a location or action, you can download the Niko Home Control User settings software via > Products > Niko Home Control > Apps for the user.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.