Skip to main content
Skip table of contents

Configuring the wireless bridge


Download the Niko Home Control programming software:

Adding Niko Home Control devices for traditional wiring to a bus wiring installation

To create a hybrid Niko Home Control installation with bus wiring and traditional wiring devices, follow the onboarding procedure in the Niko Home Control programming software (version 2.16 or newer):

  1. Open the Niko Home Control programming software
  2. Go to the tab 'Fill cabinet'
  3. Click 'Modules' to add the wireless bridge to your cabinet
  4. Add, configure and address the wireless and connected controls for traditional wiring
  5. Upload the new programming file


The wireless bridge doesn't need addressing besides the wireless and connected controls. 

Adding third-party Zigbee® devices to the wireless bridge

Consult the latest version of the Niko Home Control programming software for an overview of the compatible Zigbee® devices (go to Create > Add controls and devices).
For more information, consult Zigbee® network principle.
Moreover, see the disclaimer at http://www.niko.eu/zigbee



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.