Description
Push buttons for motor control are available in a single-row (three action buttons) or double-row (six action buttons) configuration. They allow the resident to operate the motors of one or two groups of roll-down shutters, sun blinds or awnings integrated in the Niko Home Control installation.
Overview
Operation
The specific action buttons on each push button are arranged in groups of three. Each group consists of the following buttons: "A", "B" and "C".
Action buttons with status LED will indicate the status of their respective output. Using the programming software, you can program the LEDs to light up when the output is either activated or deactivated .
The table below provides an overview of all action button functions.
|
‘Before’ status |
Action |
‘After’ status |
|
No motion |
Briefly press "A" (< 0.4 s) |
Fully open / upward motion |
|
No motion |
Briefly press "B" (< 0.4 s) |
Preference setting (standard 50%) |
|
No motion |
Briefly press "C" (< 0.4 s) |
Fully closed / downward motion |
|
No motion |
Hold down "A" (≥ 0.4 s) |
Opens / upward motion until the button is released. |
|
No motion |
Hold down "B" (> 3 s) |
The current position is now saved as the new preference setting. |
|
No motion |
Hold down "C" (≥ 0.4 s) |
Closes / downward motion until the button is released. |
|
In motion |
Briefly press "A" (< 0.4 s) |
Stops |
|
In motion |
Briefly press "B" (< 0.4 s) |
Stops |
|
In motion |
Briefly press "C" (< 0.4 s) |
Stops |
|
In motion |
Hold down "A" (≥ 0.4 s) |
Stops |
|
In motion |
Hold down "C" (≥ 0.4 s) |
Stops |
|
In motion |
Hold down "C" (≥ 0.4 s) |
Stops |
Installation
See Installation in Generic push buttons.
Technical data
-
resting potential: 26 Vdc (SELV, safety extra-low voltage)
-
ambient temperature: 0 - 50°C