Skip to main content
Skip table of contents

Generic push buttons


Single, double, 4-fold and 6-fold push buttons are available with or without status LED. These push buttons include one or more action buttons that allow the resident to operate the Niko Home Control functions.



Each action button can either control a light point or a light circuit, dim a dimmable light point up or down or activate a mood setting. A mood setting is a combination of pre-programmed output settings.

Action buttons with status LED will indicate the status of their respective output. Using the programming software, you can program the LEDs to light up when the output is either activated or deactivated .


The control element consists of a push button and one or more action buttons. Complete the installation using the flush surround plate of your choice from our series Niko Pure, Niko Intense or Niko Original.

To mount the push button, press the unit onto a Niko Home Control wall-mounted printed circuit board until it clicks into place. The push button is now secure. The functions of the action buttons can be assigned while programming the installation by linking each function to the unique address of each action button during the addressing phase. This information is then stored in the controller.

Technical data

  • resting potential: 26 Vdc (SELV, safety extra-low voltage)
  • ambient temperature: 0 - 50°C

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.