Push buttons for dimming
Description
Push buttons for dimming are available in a single-row (three action buttons) or double-row (six action buttons) configuration, with or without status LED. They allow the resident to operate one or two light points respectively, or groups of light points, via the Niko Home Control installation.
Overview
Operation
The specific action buttons on each push button are arranged in groups of three. Each group consists of the following buttons: "A", "B" and "C".
Action buttons with status LED will indicate the status of their respective output. Using the programming software, you can program the LEDs to light up when the output is either activated or deactivated .
The table below provides an overview of all action button functions.
‘Before’ status | Action | ‘After’ status |
Light off | Briefly press "A" (< 0.4 s) | “Memory off” means the light intensity level will reach 100%. “Memory on” means the light intensity level will return to the previous setting, which is the last used light intensity level prior to the dimmer being switched off. The “Memory off” or “Memory on” option can be selected during the programming phase of the installation. |
Light off | Briefly press "B" (< 0.4 s) | Preference setting (standard 50%) |
Light off | Briefly press "C" (< 0.4 s) | The light is switched on. The light intensity level remains at the lowest setting. |
Light off | Hold down "A" (≥ 0.4 s) | The light intensity level will increase until the button is released or until the maximum level is reached. |
Light off | Hold down "B" (≥ 0.4 s and < 3 s) | Preference setting (standard 50%) |
Light off | Hold down "B" (> 3 s) | The current light intensity level is now saved as the new preference setting. |
Light off | Hold down "C" (≥ 0.4 s) | The light is switched on. The light intensity level remains at the lowest setting. |
Light on. | Briefly press "A" (< 0.4 s) | The light intensity level will reach 100%. |
Light on. | Briefly press "B" (< 0.4 s) | Preference setting (standard 50%) |
Light on. | Briefly press "C" (< 0.4 s) | The light is switched off. |
Light on. | Hold down "A" (≥ 0.4 s) | The light intensity level will increase until the button is released or until the maximum level is reached. |
Light on. | Hold down "B" (> 3 s) | Preference setting (standard 50%) |
Light on. | Hold down "B" (> 3 s) | The current light intensity level is now saved as the new preference setting. |
Light on. | Hold down "C" (≥ 0.4 s) | The light intensity level will decrease until the button is released or until the minimum level is reached. |
Installation
See Installation in generic push button.
Technical data
- resting potential: 26 Vdc (SELV, safety extra-low voltage)
- ambient temperature: 0 - 50°C