Description
The push-button interface is used for connecting potential-free N.O. push buttons or NPN transistor outputs to the Niko Home Control installation. The interface converts the switching impulse of the push buttons into a Niko Home Control bus command.
Depending on the variant, you can connect one to four (550-20000), or one or two (550-20025) push buttons or NPN transistor outputs.
Each input contact of the push button interface with LEDs (500-20025) has a feedback LED, that can be used as a control or orientation light.
Within the programming software, each action button connected to a circuit wire of the push-button interface can be assigned to any kind of basic action or routine created.
Overview
| 550-20000 | 550-20025 |
|---|---|
|
|
4 input contacts no feedback LEDS | 2 input contacts 2 feedback LEDs (1 per input contact) |
Technical data
- 550-20000:
- Suitable for maximum four potential-free N.O. push buttons or NPN transistor outputs
- 550-20025:
- Suitable for one or two potential-free N.O. push buttons or NPN transistor outputs
- Do not remove or replace the attached feedback LEDs
- Resting potential: 8 Vdc (SELV, safety extra-low voltage)
- Maximum distance to push button: 2 m
- Only connect to an SELV contact (safety extra-low voltage)
- Use in an outdoor environment only in combination with splash-proof housing (e.g. Niko Hydro)
- Dimensions (HxWxD): 41.5 x 20.9 x 5 mm
- Marking: CE
- Ambient temperature: -25 - 55 °C