Replace a push button without indication LED by a push button with LED (or vice versa)

Situation

This step-by-step plan explains how you can quickly and easily replace a push button without indication LED by a push button with indication LED. As an example we will replace the single lighting control of the terrace.

Starting point

The starting point for this step-by-step plan is a project which already encompasses Project information, for which a plan was already drawn up or uploaded and where several inputs, outputs and actions have already been added.

Step 1: Select the push button you wish to replace

Go to Creation in the menu bar at the top.

Choose one of the following possibilities:
- In the plan, click on the push button you wish to replace.
  or
- Open the list of options at the top left and click on the push button you wish to replace.

The selected push button is highlighted in the plan and on the right you see the data of the push button.

Step 2: Replace the push button without LED

Under the data of the push button, click on replace by a single push button with LED. In the plan, the selected push button is now replaced by a push button with LED.

In this example we have replaced a single push button. In the same way, you can also replace multiple push buttons by multiple push buttons with LED.

At the bottom right, click on save.

Don't forget to address the new push button on site!

Step 3: Replace a push button with LED by a push button without LED

Select the push button you wish to replace (see above).
Under the data of the push button, click on replace by a single push button. In the plan, the selected push button is now replaced by a push button without LED.
At the bottom right, click on save.