Manually create an all-off/all-on routine
When you did not configure the smart hub yet (see Configuration), you can manually program an all-off/all-on routine.
You can start (and stop) this routine with a wireless switch with two buttons (410-00001) or four buttons (410-00002).
You can use this routine to switch on or off all outputs that are connected to the connected single or double switches (551-721x1 or 551-721x2), connected dimmers (551-722x1) and/or connected switching socket outlets (170-33x05).
This manually programmed routine will be erased once you configure the smart hub (see Configuration).
Proceed as follows:
| Step | Action | Duration | LED behaviour | |
|---|---|---|---|---|
| 1 | Press the control button on the smart hub. |
|
| blue LED flashing |
| 2 | On the wireless switch 410-00001 or 410-00002 press the button you want to use to start/stop the routine. |
|
| blue LED on for 4 s |
| 3 | On the connected switch, dimmer or socket outlet you want to control press any button. |
|
| blue LED on for 4 s |
| 4 | Repeat step 3 for all the connected devices you want to control in the routine. |
|
| blue LED on for 4 s |
| 5 | Press the control button on the smart hub to save your new routine. |
| ||
