This onefold wireless battery-powered Zigbee® switch allows you to control wireless Zigbee® devices remotely.
Adding a switch to an electrical installation is made easy as cutting, grinding or adding electrical wires is no longer needed. The switch is battery-powered with a lifetime of 5 years with up to 20 short push events per day.
The onefold switch with a plastic base (552-72001) can be mounted on flat surfaces via double-sided adhesive tape (included) or screws (excluded). For installation on flush-mounting boxes, order the onefold switch without a plastic base (552-72011), together with the metal base variant for your region (552-720X0).
The wireless battery-powered Zigbee®switch can operate in 2 modes: stand-alone use and connected use.
In stand-alone use, it is not connected to a wireless smart hub (552-00001) or wireless bridge (550-00640) and operates as a standard dimmer switch (ON/OFF/dimming). The switch can connect with up to eight Zigbee® receivers via Touchlink pairing. A feedback LED displays the pairing state and battery condition during the pairing process. No feedback LED is visible during normal operation. In stand-alone mode, the onefold wireless battery-powered Zigbee® switch does not support colour control (RGB), nor tunable white control (colour temperature).
In connected use, the switch is linked to the wireless smart hub (552-00001) or the wireless bridge for Niko Home Control (550-00640) via an integrated wireless Zigbee® transmitter and receiver. The following functions are available with the Niko Home Control programming software or the Niko Home app:
- Display a battery low indication in the Home app when the battery needs to be replaced
- Link the onefold wireless battery-powered Zigbee® switch to a scene or all-off function
- Configure it to a panic (all-on) function, routine, calendar, or scheduling function
- Operate multiple lighting circuits within the same installation
- Control the onefold wireless battery-powered Zigbee® switch via the Niko Home Control touchscreen ( 550-20102 ), Digital black® (550-1800x, 551-1800x) or remotely via a smart device using the Niko Home app.
When connected to your Niko Home Control installation, the onefold wireless battery-powered switch, Zigbee® will automatically be upgraded to the latest firmware version.
Note that the onefold wireless battery-powered Zigbee® switch can also be configured to a third-party Zigbee® network via EZ-mode pairing or Find&Bind pairing. In this case, the switch is used as a standard dimmer switch (ON/OFF/dimming).
The single key and faceplate must be ordered separately. This Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines.
There are 5 mechanical variants. These variants fit most installations on flat walls and European flush-mounting boxes. Select the desired variant based on the fixing method (wall mounting or flush-mounting box installation, via adhesive tape, screw or claw fixation) and the desired vertical centre distance if multifold flush-mounting boxes are used. For more details, see Installing the wireless battery-powered onefold switch, Zigbee®.
A complete onefold wireless battery-powered Zigbee ® switch consists of the following parts:
- 1 base
Choose one from the table below:
Wireless battery-powered switch, onefold, Zigbee®, 60 x 71 mm, plastic base, fixing with screws (excluded) or double adhesive tape (included), with CR2450 battery (included)
Wireless battery-powered switch, onefold, Zigbee®, 60 x 71 mm, excluding base, with CR2450 battery (included)
Metal base for 552-72011, 60 x 71 mm, claw fixing
Metal base for 552-72011, 71 x 71 mm, screw fixing
Metal base for 552-72011, 60 x 71 mm, screw fixing
Metal base for 552-72011, 71 x 71 mm, claw fixing
- 1 central plate
Finishing set for an electronic switch or push button
Note that xxx represents the colour.
- 1 faceplate
The onefold wireless battery-powered Zigbee® switch is compatible with all faceplates from the Niko range. For more information, consult our Finishings website page.
Paint protection cap
Optionally, you can order a paint protection cap (170-00099 ) to cover the onefold wireless battery-powered, Zigbee® during painting work. With it, you avoid getting paint spatters on your switching materials.
Screw fixing or double-sided adhesive tape
Centre to centre distance
60 mm x 71 mm
60 mm x 71 mm
|71 mm x71 mm||60 mm x 71 mm||71 mm x 71 mm|
|Power supply||3 V battery, CR2450|
|Battery life span||± 5 years at 20 short actuations/day|
|Zigbee® 3.0, 2.4 GHz|
Wall mounting with 552-72001
Flush-mounting box with 552-72011 in combination with metal base 552-720X0
|Flush-mounting box specifications|
|Min. 40 mm (cabling space included)|
B. Claw/screw fixing
|C. Inner diameter box||60 mm|
D. Multifold boxes centre distance horizontal
|E. Multifold boxes centre distance vertical|
|F. Multifold boxes centre distance vertical for BE and FR||60 mm|
|105 - 120 cm|
|Modification of settings|
|Button on rear side|
Niko Home Control programming software
Niko Home app
Maximum range (between switch and smart hub or wireless bridge)
|10 m (Longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices)|
|Maximum per installation|
Max. 50 connected Zigbee® devices
Stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
|Operating frequency||2.4 GHz|
|Maximum RF power||8 dBm EIRP|
|Operation||5 - 30 °C|
0 - 40 °C
|Humidity||0 - 95 % relative humidity, non-condensing|
|Weight (552-72001 / 552-72011)||23 g ±1 g / 17 g ±1 g|
(552-72011 + 552-72000 or 552-72020) 71 x 73 x 21 mm
(552-72011 + 552-72010 or 552-72030) 73 x 73 x 21 mm
|With Niko Original or Niko Pure faceplate||83 x 83 x 15 mm|
|With Niko Intense faceplate||85 x 85 x 15 mm|