Description
The wireless motion detector can be used to control other switching contacts. For example, when motion is detected, you can control the contact of another connectable switch, dimmer or motor control.
Since the motion detector is powered by a button battery and is supplied with a self-adhesive mounting plate, it can be easily attached anywhere.
This motion detector can only be used in combination with the wireless smart hub for Niko Home Control (552-00001). This makes it possible to configure additional functionalities with the Niko Home Control programming software.
Overview
552-80401
Onboarding
Installation
Dismantling
Troubleshooting
Problem | Possible cause | Proposed solution |
|---|---|---|
| The detector does not pick up movement | Battery empty (app error message) | Replace the battery |
| The detector is out of range | Bring the smart hub closer to the detector | |
| The detector is not configured | Press the reset button and reconfigure within 3 minutes | |
| The detector is mounted upside down | Mount the detector correctly | |
| The red LED does not blink and the detector does not pick up movement | The detector was not configured or was configured for another system | Press the reset button and (re)configure the detector |
The motion detector enters awake mode for one second after motion detection.
This value is hardcoded in the motion detector and cannot be changed. When the motion detector is not “awake”, it is in sleep mode to preserve battery life.
If the detector is in sleep mode, you may receive a notification 'Cannot be reached' on the diagnostics page of the Niko Home Control programming software.
Technical data
Dimensions in mm
System overview
Detection area
Specifications
| Specification | Value |
|---|---|
| Article number | 552-80401 |
| Power supply | Battery: CR2450 |
| Mounting method | Wall mounting |
| Mounting height | 250 - 280 cm |
| Weight | 69 g |
| Ambient temperature | 0 – 40 °C |
| Dimensions (HxWxD) | 51 x 51 x 34 mm |
| Protection degree | IP20 |
| Modification of settings | Niko Home Control programming software |
| Maximum range open field (from detector to smart hub) | 30 m |
| Maximum range indoor (from detector to smart hub) | 10 m |
| Communication protocol | Zigbee® 3.0 |
| Operating frequency | 2.4 GHz |
| Maximum frequency power | 7 dBm / 5 mW |
| Marking | CE, WEEE |
| Battery lifespan | Approximately 2 years at 10 actuations/day |