Page tree
No Translation available yet

You have English selected as language but this page has not been translated yet. Translate the page or view the content in the default space language below.

Display default
Skip to end of metadata
Go to start of metadata

What can you do with Niko Home Control?

By using Niko Home Control with your Velux system, you can do the following:

  • Open and close windows, sun screens and shutters
  • Stop opening or closing windows, sun screens and shutters

The Velux functions automatically appear in your Niko Home Control apps and your touchscreens after you activate the link between both systems. These functions can also be combined in routines/actions to control multiple items simultaneously at the simple press of a button (e.g. turn off all the lights and close the roof window when pressing the leaving the house button).

The available functionality within Niko Home Control depends upon the specific installation features of the Velux system.

What do you need?

In shortExtra information
GeneralSpecific electrial wiring is required.An SVV cable with a minimum of 12 conductors is installed between the electrical cabinet and the KLF 200 module(s).

Your Niko Home Control installation meets the following requirements:

  • It has a connected controller II.
  • It is configured with the most recent programming software (version 2.1.1 or higher).
  • For each roof window a Niko Home Control switching module with 2 free outputs is installed in the electrical cabinet.
  • If you want to use the Velux functions in combination with Niko Home Control actions, these actions need to be programmed with the Niko Home Control programming software before the link is activated.

One of the following modules can be used:

Per 5 INTEGRA® Velux windows a KLF 200 module is installed.

The KLF 200 module:

  • provides the connection to Niko Home Control.
  • is ideally located near your Velux window.
  • can control maximum 5 Velux windows.

How do you activate the link between your Niko Home Control and your Velux system?

You have to setup the connection and functionality via the Niko Home Control programming software. Ask your professional installer for help.

  • No labels