Gebruikershandleiding NHC II
Page tree
No Translation available yet

You have English selected as language but this page has not been translated yet. Translate the page or view the content in the default space language below.

Display default
Skip to end of metadata
Go to start of metadata

What can you do with Niko Home Control?

By using Niko Home Control with your Bulex system, you can do the following:

  • Check and control the room temperature
  • Check the outside temperature
  • Choose the heating program mode (e.g. home, away)
  • Choose the operation mode (e.g. summer, winter, frost guard)
  • Check and boost the temperature of the hot water system

          

The Bulex functions automatically appear in your Niko Home Control apps and your touchscreens after you activate the link between both systems. These functions can also be combined in routines/actions to control multiple items simultaneously at the simple press of a button (e.g. turn off all the lights and reduce the set point temperature when pressing the leaving the house button).

  • The available functionality within Niko Home Control depends upon the specific installation features of the Bulex system.
  • You can always use the MiGo app for more advanced settings and configurations.


What do you need?


In shortExtra information
General
  • No additional electrical wiring is required.
  • You have a computer with a web browser and an internet connection to set up the link between both systems.

Your Niko Home Control installation meets the following requirements:

  • It has a wireless smart hub or a connected controller II.
  • It is configured with the most recent programming software (version 2.6 or higher).
  • It has an active internet connection.
  • It is registered and you have your e-mail address and password on hand.
  • If you want to use the Bulex functions in combination with Niko Home Control actions, these actions need to be programmed with the Niko Home Control programming software before the link is activated.
If you have not registered your Niko Home Control installation, go to mynikohomecontrol.niko.eu .

Your Bulex system meets the following requirements:

  • It is a Bulex boiler having an eBUS connection (except ThemaTek and ThemaClassic).
  • It has a MiGo thermostat.
  • It has an active internet connection.
  • It has a Bulex  communication unit and you have its  serial number on hand.

You can find the serial number of the communication unit:

  • on the backside or the inside of the unit below the barcode
  • in the MiGo app (android or iOS)


How do you activate the link between your Niko Home Control and your Bulex system?

  1. Check if you have everything you need (see above).
  2. Go to https://mynikohomecontrol.niko.eu.
  3. Log in with your e-mail address and password.
  4. Click the Connected services  button. This is where you manage all the services linked to your installation, including the Bulex system.

  5. Click the ALL tab or the  Add another service button in the ACTIVE tab.

  6. Click the  Bulex  logo.

  7. Fill in the serial number of the Bulex communication unit.

  8. Click Activate.

  9. Follow the instructions on your screen to complete the activation.


How do you deactivate the link between your Niko Home Control and your Bulex system?

  1. Log in to  https://mynikohomecontrol.niko.eu with your e-mail address and password.

  2. Click the Connected services button. This is where you manage all the services linked to your installation, including the Bulex system. 

  3. Click the ACTIVE tab.

  4. Click the three dots next to the Bulex logo and click Deactivate.



After deactivating the link, the following happens:

  • The Bulex functions disappear from your Niko Home Control apps, your touchscreens and Digital blacks.
  • When used in Niko Home Control actions, the Bulex functions will not be executed anymore.


How do you update the link settings between your Niko Home Control and your Bulex system?

  1. Log in to  https://mynikohomecontrol.niko.eu with your e-mail address and password.

  2. Click the Connected services button. This is where you manage all the services linked to your installation, including the Bulex system. 

  3. Click the ACTIVE tab.

  4. Click the three dots next to the Bulex logo and click Manage this connected service.

  5. Follow the instructions on your screen.



  • No labels