Touchswitch is a completely customisable touchscreen which has an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near, so you can switch or dim your lights, set moods, set ventilation modes, adjust the temperature, adjust blinds and sun blinds to the desired position, in one operation. In short, all possible types of controls are available in your Niko Home Control system. With the corresponding configuration app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the respective app store for your mobile device.
Connect the power supply to the installation (230 V).
Before you begin, check the following:
- Your Niko Home Control installation is completely installed en programmed.
- Your installation runs on version 2.4 or higher.
- Your installation is registered on http://MyNikoHomeControl.eu.
Disconnect the power supply to the installation.
Max. wire length from power supply to the last connected touchswitch
Dimensions in mm
|Power supply||24 Vdc (SELV)|
|Maximum power consumption||5,5 W|
|Power consumption (standby)||1 W|
|Mounting method||Wall flush-mounting, screw or claw|
|Mounting height||110 - 160 cm|
|Ambient temperature||0 – 40 °C|
|Dimensions (HxWxD) (mechanism)||75 x 70 x 23.6 mm|
|Dimensions (HxWxD) (screen)||83 x 83 x 11.5 mm|
|Screen resolution||1024 x 768 pixels|
|Proximity sensor||0 - 30 cm|
|Temperature sensor range||0 - 40 °C|
|Modification of settings||Niko Home Control programming software|
|Configuration||Niko Home app|
|Communication||Wifi 2.4 GHz bgn|
|System compatibility||Niko Home Control II|
|Maximum frequencypower||10 dBm|
|Maximum number of touchswitches per installation||10|
|Wire capacity||2 x 0.5 – 1 mm2|