Contrôle de la consommation d'énergie avec écran éco

What is energy monitoring with eco-display?

With the advanced action Energy monitoring with eco-display you can configure which energy channel is displayed on the eco-display.
You can also select the following measured energy channels:

• electricity consumption
• electricity yield
• gas consumption
• water consumption
  

Starting point

• You have created the necessary players:

  • eco-display

  • single-phase electricity reading

  • three-phase electricity reading

  • electrical pulse reading

  • water reading

  • gas reading

  Click here for an overview of the players you can use in this advanced action.

• You are in the Create overview window.

Procedure

1. In the right-hand button bar, click on the button Advanced action.
   Result:
   The Advanced action pane appears.
2. Choose the room as follows:
   • Choose Room from the drop-down list.
   • Click on the room in the drawing area.
3. Click on the arrow next to the category Energy control.
4. Click on Energy monitoring with eco-display.

5. Give the action a name.

6. Set the behaviour as follows:

   Behaviour	What?	How?
   A	Choose the eco-display where you want to display the energy values measured.	Click on the symbol of the eco-display you want to include in the action. You can only add one eco-display per action.
   B	Choose the energy channels for which you want to display the values on the eco-display.	Click on the symbols of the players. You can add several channels per action.

   At least one player is required for both behaviour A and behaviour B. If you do not add this player, the action symbol will show a warning. Underneath the behaviour the following message will be displayed: you have to add at least one player to complete the action.

7. In this action you cannot set any parameters. You can, however, adjust other settings that affect this action.

   Click on ...	To ...
   Dashboard > Project info and settings > Global settings	adjust the currency and rates of the readings.
   the players in the drawing area: single-phase electricity reading three-phase electricity reading electrical pulse reading water reading gas reading	add a short name (this will be displayed on the eco-display); choose between a global reading of consumption, a partial reading of consumption and, for electricity, a reading of the yield; enter the number of pulses per unit: pulses/kWh for electricity and pulses/m³ for water and gas.

Video

See an example here. Turn on the sound to watch the video.