What is all-off with walkway assistance?

With the advanced action All-off with walkway assistance you can switch off all desired output players with only one control. You can also make certain outputs stay on for an additional pre-set time before they are switched off as well. Unlike with a basic all-off action, you can programme a different switch-off delay for different outputs.

Starting point

  •  You have created the following players:
    • a control (generic button)

    • all output players you want to switch off with this action

      Click here for an overview of the players you can use in this advanced action.

  • You are in the Create overview window.



Procedure

  1. In the right-hand button bar, click on the button Advanced action.
    Result:
    The Advanced action pane appears.

  2. Choose the room as follows:
    • Choose Room from the drop-down list.
    • Click on the room in the drawing area.

  3. Click on the arrow next to the category Leaving the house.

  4. Click on All-off with walkway assistance.
  5. Give the action a name.

  6. Set the behaviour as follows:

    BehaviourWhat?How?
    AChoose the control(s) that will activate the action.

    Click on the plus signs of the controls you want to include in the action.

    BSelect output players which will stay on longer after you have activated the action (optional).

    1 Click on the plus signs of the outputs that are part of the walkway assistance.

    2 Each player selected in this step can switch on, switch off or both.

    Does the player have to switch on or off? Select on or off as a value. Does the player have to do both? Then select the option Reuse player.

    Set the delay if desired.


    CSelect output players which must switch off immediately.

    Click on the plus signs of the outputs which must switch off immediately. You can select all player types.

  7. Under Parameters, invert the feedback LED if desired (this parameter will only be shown if at least one button with LED has been selected).

  8. Click the Close button to return to the Advanced action pane.

  9. Click the Close button to return to the Create overview window.
    The feedback LED will then be on when all lighting and devices are switched off.

Use Multiselect to select various outputs at the same time.

Set the operating time to Press and hold to avoid activating the all-off action by mistake.

Video

See an example here. Turn on the sound to watch the video.

  • No labels