Versions Compared

Old Version 3

changes.mady.by.user Yves Barbion

Saved on

compared with

New Version 4

changes.mady.by.user Niko

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published by Scroll Versions from space DGNII and version 1.0
Sv translation
languageen
Note

For an installation with version 2.16 or earlier, the link between Niko Home Control and SMA can be activated and deactivated on mynikohomecontrol.niko.eu.

What can you do with Niko Home Control?

By using Niko Home Control with your SMA system, you have access to the following:

  • Insights into your total electricity consumption (*)

    • What part comes from your solar panels?

    • What part comes from the grid?

  • Insights into your total energy production (*)
    • What part do you inject into the grid?
    • What part do you consume yourself?
  • Insights into your PV panel production (*)
  • Insights into your self-consumption (% of total production) (*)

(*) Please check the requirements in the "What do you need?" table below.

Niko Home control offers even more ways to rationally manage your energy consumption.

Check out the routines Solar mode and Peak mode, and smart alerts in the Niko Home app.

Info

The available functionality within Niko Home Control depends upon the specific installation features of the SMA system.


Anchor
requirements
requirements
What do you need?


In shortExtra information
General
  • No additional electrical wiring is required.
  • You have a computer with the Niko Home Control programming software version 2.17 or higher.
  • You have connected both systems to the same home network.

Your Niko Home Control installation meets the following requirements:

  • It has a wireless smart hub or a connected controller II.
  • It is configured with the most recent programming software (version 2.17 or higher).
  • It has an active internet connection.
  • It is registered and you have your e-mail address and password on hand.
  • If you have not registered your Niko Home Control installation, go to mynikohomecontrol.niko.eu.
  • You need global electricity measurement:For installation type:
    • connected controller, you need to:

    • Option A: install an electricity measuring module (1 channel or 3 channels, depending on your installation) for Niko Home Control in the electrical cabinet. The module is set to reading type "global reading". 

      • Option B: connect  connect your installation to the P1 port of your digital meter by using the wireless bridge for Niko Home Control.For installation type
    • wireless smart hub, you need to connect the smart hub to the P1 port of your digital meter with the provided P1 cable.

Your SMA system meets the following requirements:

  • It is a supported SMA inverter and you have its serial number on hand.
  • It has an active internet connection.
  • MODBUS port on the inverter is enabled by your PV installer during installation.
  • Click here for a list of supported SMA inverters.
  • You can find the serial number on the SMA inverter.
  • If the MODBUS communication was not enabled by your PV installer, Niko Home Control will try to enable the port automatically. When it doesn't succeed, you will have to enter the SMA installer password on the Niko portal during the activation procedure to enable the port.
  • The default SMA installer password is 1111.
  • If you don't have the SMA installer password, please contact your PV installer or fill in the form on the SMA website.


How do you activate the link between your Niko Home Control and your SMA system?

You have to set up the connection and functionality via the Niko Home Control programming software. Ask your professional installer for help.

How do you deactivate the link between your Niko Home Control and your SMA system?

You deactivate the link with the Niko Home Control programming software. Ask your professional installer for help.  

Info

After deactivating the link, the following happens:

  • The SMA functions will disappear from your Niko Home Control apps, your touchscreens and Digital blacks.
  • When used in Niko Home Control actions, the SMA functions will not be executed anymore.

How do you update the link settings between your Niko Home Control and your SMA system?

Not applicable


Anchor
supported SMA inverters
supported SMA inverters

Supported SMA inverters

In general, the SMA inverters sold from 2017 onwards are compatible with Niko Home Control II.

You find a complete list below.

Sunny BoySunny TripowerSunny Tripower Smart Energy

SB1.5-1VL-40

SB2.0-1VL-40

SB2.5-1VL-40

SB6.0-1AV-41 

SB6.0-1AV-40 

SB5.0-1AV-41 

SB5.0-1AV-40 

SB4.0-1AV-41 

SB4.0-1AV-40 

SB3.6-1AV-41 

SB3.6-1AV-40 

SB3.0-1AV-41 

SB3.0-1AV-40

STP10.0-3AV-40 

STP8.0-3AV-40 

STP6.0-3AV-40 

STP5.0-3AV-40 

STP4.0-3AV-40 

STP3.0-3AV-40

STP5.0-3SE-40

STP6.0-3SE-40 

STP8.0-3SE-40 

STP10.0-3SE-40




...