Skip to main content
Skip table of contents

Renson and Niko Home Control

For an installation with version 2.16 or earlier, the link between Niko Home Control and Renson can be activated and deactivated on mynikohomecontrol.niko.eu.

What can you do with Niko Home Control?

By using Niko Home Control with your Renson system, you can do the following:

  • Control the ventilation speed (e.g. auto, silent)

  • Boost the ventilation

The Renson functions automatically appear in your Niko Home Control apps and your touchscreens after you activate the link between both systems. These functions can also be combined in routines/actions to control multiple items simultaneously at a simple press of a button (e.g. turn off all the lights and activate the ventilation boost to refresh the indoor air when pressing the leaving the house button).

Available functionality within Niko Home Control depends upon the specific installation features of the Healthbox 3.0.


What do you need?


In short

Extra information

General

  • No additional electrical wiring is required.

  • You have connected both systems to the same home network via cable and/or Wi-Fi.

A cabled connection is the preferred solution.

Your Niko Home Control installation meets the following requirements:

  • It has a wireless smart hub or a connected controller II.

  • It is configured with the most recent programming software (version 2.17 or higher).

  • It has an active internet connection.

  • It is registered.

  • If you want to use the Renson functions in combination with Niko Home Control actions, these actions need to be programmed with the Niko Home Control programming software after the link has been activated.

If you have not registered your Niko Home Control installation, go to Register your installation.

Your Renson system meets the following requirements:

  • It is a Healthbox 3.0.

  • It is connected to your local home network.



How do you activate the link between your Niko Home Control and your Renson system?

You have to set up the connection and functionality via the Niko Home Control programming software. Ask your professional installer for help.


How do you deactivate the link between your Niko Home Control and your Renson system?

You deactivate the link with the Niko Home Control programming software. Ask your professional installer for help. 


After deactivating the link, the following happens:

  • The Renson functions disappear from your Niko Home Control apps, your touchscreens and Digital blacks.

  • When used in Niko Home Control actions, the Renson functions will not be executed anymore.

How do you update the Niko Home Control basic actions and routines that use your Renson system?

You update the basic actions and routines with the Niko Home Control programming software



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.