Skip to main content
Skip table of contents

Remeha and Niko Home Control

What can you do with Remeha and Niko Home Control?

By using Niko Home Control with your Remeha system, you can do the following:

  1. In combination with Niko Home Control, your Remeha system can be used to perform multi-zone heating and cooling.
    Connect your Remeha system using the Niko Home Control multi-zone heating or cooling module (550-00150) and push buttons with LED(s) and comfort sensors.
    Multiple functions are available depending on whether your Niko Home Control installation contains a smart hub or a connected controller.

  2. In addition, you can perform energy routines with Niko Home Control: solar mode and peak mode.
    You can enable these functions by connecting your Remeha system via SG-ready contacts.

Multi-zone heating cooling

With the smart hub (552-00001)

With the connected controller (550-00003)

Using the Remeha multi-zone solution

Not available

  • Perform single and multi-zone control

  • Check and set the room temperature

  • Choose the heating program mode (e.g., home, away, vacation)

  • Check and set a weekly program

Using the Niko Home Control multi-zone heating or cooling module (550-00150) and push buttons with LED(s) and comfort sensors

Energy savings automation

With the smart hub (552-00001)

With the connected controller (550-00003)

Using SG-ready contacts

  • Solar mode

  • Peak mode

  • Solar mode

  • Peak mode


How do you activate the link between your Niko Home Control and your Remeha system?

You can (de)activate the link between Niko Home Control and your Remeha system via the Niko Home Control programming software.
Note that any basic actions and routines linked to your Remeha system are also updated via the programming software.
You will find the requirements and detailed instructions in the software manual.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.