Skip to main content
Skip table of contents

Mitsubishi Electric and Niko Home Control

For an installation with version 2.16 or earlier, the link between Niko Home Control and Mitsubishi Electric can be activated and deactivated on mynikohomecontrol.niko.eu.

What can you do with Niko Home Control?

By using Niko Home Control with your Mitsubishi Electric system you can do the following:   

  • Control and check the room temperature

  • Check the outside temperature

  • Check the CO2 concentration

  • Choose the heating program mode (e.g. home, away)

  • Choose the operation mode (e.g. heat, dry, cool, fan, auto)

  • Control the fan ventilation speed (e.g. auto, speed 1 or speed 2)

  • Boost the hot water system

  • Turn your Mitsubishi Electric system on or off

  • Control multiple rooms individually

    

The Mitsubishi Electric functions automatically appear in your Niko Home Control apps and your touchscreens after you activate the link between both systems. These functions can also be combined in routines/actions to control multiple items simultaneously at the simple press of a button (e.g. turn off all the lights and reduce the set point temperature when pressing the leaving the house button).

  • The available functionality within Niko Home Control depends upon the specific installation features of the Mitsubishi Electric system.

  • You can always use the MELCloud app for more advanced settings and configurations.


What do you need?


In short

Extra information

General

  • No additional electrical wiring is required.

  • You have a computer with a web browser and an internet connection to set up the link between both systems.


Your Niko Home Control installation meets the following requirements:

  • It has a wireless smart hub or a connected controller II.

  • It is configured with the most recent programming software (version 2.17 or higher).

  • It has an active internet connection.

  • It is registered.

  • If you want to use the Mitsubishi Electric functions in combination with Niko Home Control actions, these actions need to be programmed with the Niko Home Control programming software after the link has been activated.

If you have not registered your Niko Home Control installation, go to Register your installation.


Your Mitsubishi Electric system meets the following requirements:

  • It is a Mitsubishi Electric airconditioning or a heat pump system (air/air and air/water) or a Mitsubishi Electric Lossnay “ventilation” system.

  • It is equipped with a Wi-Fi adapter.

  • It is compatible with MELCloud cloud platform.

  • It has an active internet connection.

  • It is registered and you have your MELCloud user account and password on hand.

If you have not registered your Mitsubishi Electric system, go to melcloud.com


How do you activate the link between your Niko Home Control and your Mitsubishi Electric system?

You have to set up the connection and functionality via the Niko Home Control programming software. Ask your professional installer for help.


How do you deactivate the link between your Niko Home Control and your Mitsubishi Electric system?

You deactivate the link with the Niko Home Control programming software. Ask your professional installer for help. 

After deactivating the link, the following happens:

  • The Mitsubishi Electric functions disappear from your Niko Home Control apps, your touchscreens and Digital blacks.

  • When used in Niko Home Control actions, the Mitsubishi Electric functions will not be executed anymore.


How do you update the Niko Home Control basic actions and routines that use your Mitsubishi Electric system?

You update the basic actions and routines with the Niko Home Control programming software


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.